nabokovfan87 Posted October 3, 2023 Share Posted October 3, 2023 On 10/2/2023 at 10:59 PM, Odd Duck said: I’ve not heard of them being a particularly sensitive species, but I haven’t been successful with any except him. 🤷🏻♀️ 😞 I wish I could get some good photos of luigi for comparison. I am 99.9% sure she's a female. Do you have a photo of the pattern on yours or is it a known L number species? (I'm not sure which mine is) Link to comment Share on other sites More sharing options...
Odd Duck Posted October 3, 2023 Share Posted October 3, 2023 On 10/3/2023 at 1:08 AM, nabokovfan87 said: I wish I could get some good photos of luigi for comparison. I am 99.9% sure she's a female. Do you have a photo of the pattern on yours or is it a known L number species? (I'm not sure which mine is) Here’s the best pic I have of his topside from June last year. I have newer pics but none show his pattern better. See all the texture on his back half? Makes me think of the surface of a cat’s tongue. That’s supposed to indicate male. 3 Link to comment Share on other sites More sharing options...
Chick-In-Of-TheSea Posted October 3, 2023 Share Posted October 3, 2023 I finally hot glued this mesh to the lid (snail safety measure). I’ve been dealing with the annoyance of the mesh pieces falling in the tank every time I open the lid far enough for it to stay open. This requires shifting the lid forward, due to the light position, and where the fold is, etc. There needs to be more decent glass lids on the market than what there are (hint hint @Cory). This lid used to have a vinyl strip but that was equally annoying, hard to cut, and never laid flat. Also once you cut it, you cannot really reconfigure your setup. 1 1 Link to comment Share on other sites More sharing options...
nabokovfan87 Posted October 3, 2023 Share Posted October 3, 2023 (edited) On 10/2/2023 at 11:20 PM, Odd Duck said: See all the texture on his back half? Makes me think of the surface of a cat’s tongue. That’s supposed to indicate male. Yeah, definitely has that texture! I've got two, one is a bit chunkier line pattern (Luigi) and the other is my "fancy one" the brown is more black, but the line pattern looks similar. That's the one that I thought was a flash we were looking at a bit ago. I'm 99.9% sure both are females though. It's tough when they are sold as just generic fish at the big box store and maybe the name is right. Edited October 3, 2023 by nabokovfan87 1 Link to comment Share on other sites More sharing options...
Ruud Posted October 3, 2023 Share Posted October 3, 2023 Planted the plants I got last night into the 100L tank (see the journal in the photo section), did a water change in the Cube tank, got some peroxide for a spare piece of wood and some stones that I had laying around to get the algae of it 1 Link to comment Share on other sites More sharing options...
nabokovfan87 Posted October 3, 2023 Share Posted October 3, 2023 (edited) It's a super minor thing, but slightly fun and exciting. A. New suction cups. B. New design (better flow?) And I can now just swap diffusers when need be back and forth to keep them clean. I really like the "low profile" of the new one and that it doesn't hold a bunch of air. It was nice when it worked as a sort of bubble counter, but this one was the 2-3 I purchased and it doesn't really do that as well on this newer order of the old one. Edited October 3, 2023 by nabokovfan87 1 1 Link to comment Share on other sites More sharing options...
FLFishChik Posted October 3, 2023 Share Posted October 3, 2023 Had Albino Corydoras unexpectedly breed in my 29g tank. I am totally unprepared and lost 50 or so eggs trying to clumsily scrape them from the glass. managed to save 7 eggs. they are now floating in the tank in a disposable storage cup. Will they survive? I highly doubt it, but it was worth a try. Time to buy a breeder box and be a little more prepared for next time. 3 Link to comment Share on other sites More sharing options...
Chick-In-Of-TheSea Posted October 4, 2023 Share Posted October 4, 2023 On 10/3/2023 at 7:37 PM, FLFishChik said: Had Albino Corydoras unexpectedly breed in my 29g tank. I am totally unprepared and lost 50 or so eggs trying to clumsily scrape them from the glass. managed to save 7 eggs. they are now floating in the tank in a disposable storage cup. Will they survive? I highly doubt it, but it was worth a try. Time to buy a breeder box and be a little more prepared for next time. @Guppysnail @nabokovfan87 2 Link to comment Share on other sites More sharing options...
nabokovfan87 Posted October 4, 2023 Share Posted October 4, 2023 On 10/3/2023 at 4:37 PM, FLFishChik said: Had Albino Corydoras unexpectedly breed in my 29g tank. I am totally unprepared and lost 50 or so eggs trying to clumsily scrape them from the glass. managed to save 7 eggs. they are now floating in the tank in a disposable storage cup. Will they survive? I highly doubt it, but it was worth a try. Time to buy a breeder box and be a little more prepared for next time. you can use basically anything that will hold water plus an airstone. Single bubble air diffusion and it'll give just enough flow. I think I've seen so many methods to try out with eggs, specifically corydoras eggs, I've realized how much I just don't know. As far as the squishy ones, floating ones, can you take photos? If they squish, they might have just been eggs (unfertilized). 1 Link to comment Share on other sites More sharing options...
mountaintoppufferkeeper Posted October 4, 2023 Share Posted October 4, 2023 Fed the aquahuna purchased algae shrimp ....some extreme algae flake I got from the coop. As suggested on the forum this is an attempt at a polyculture with neocaradina in the floating german breeding ring abive. The spotted congo fry. The intent to have shrimplets for baby puffers when the sizes work out One of the F1 spotted congo fry. Still growing just the 4. Post puffer room reset the adult spotted congo group hasnt yet thrown eggs into my collector. Big fan of sitting on the leaves next to a shrimp that left the breeding ring Another of the four f1 fry. They like tiny snails and whiteworms currently And the four cross rivers got a billiondy'ish 🙂 earthworms tonight 3 2 Link to comment Share on other sites More sharing options...
Chick-In-Of-TheSea Posted October 4, 2023 Share Posted October 4, 2023 On 10/3/2023 at 10:27 PM, mountaintoppufferkeeper said: Big fan of sitting on the leaves That is adorable. 2 Link to comment Share on other sites More sharing options...
FLFishChik Posted October 4, 2023 Share Posted October 4, 2023 (edited) On 10/3/2023 at 9:12 PM, nabokovfan87 said: As far as the squishy ones, floating ones, can you take photos? If they squish, they might have just been eggs (unfertilized They weren’t squishy, I’m just clumsy and dropped most of them trying to scrape them off the glass. I’ll have to work on my technique. None were floating- I put the in a disposable storage cup with tank water and floated that inside the tank Edited October 4, 2023 by FLFishChik Spelling 1 Link to comment Share on other sites More sharing options...
Odd Duck Posted October 4, 2023 Share Posted October 4, 2023 On 10/3/2023 at 6:37 PM, FLFishChik said: Had Albino Corydoras unexpectedly breed in my 29g tank. I am totally unprepared and lost 50 or so eggs trying to clumsily scrape them from the glass. managed to save 7 eggs. they are now floating in the tank in a disposable storage cup. Will they survive? I highly doubt it, but it was worth a try. Time to buy a breeder box and be a little more prepared for next time. You can just coax them to stick to your finger, then coax them to stick to the breeder box. I either touch my finger to the glass next the egg, then sort of lift a bit and slide at the same time across the egg(s) and the egg will usually stick to your finger. Then you kind of reverse that action to roll them onto the wall of the breeder box. I’ve had the best success with the eggs on the wall of the breeder box vs. on the bottom. I’ve also use an old plastic credit card and press it tight to the glass, coming up from underneath the eggs slowly and lifting the whole egg mass onto the card. Then I hold my thumb gently over the mass of eggs since the whole group won’t reliably stick to the card when I do this. Then lift out and into the breeder box and I try to stick them to the side but it won’t always work, for some reason. Turning off any pumps/filters so there’s minimal flow during this part can help reduce the number of eggs dropped. I use this method when there’s been a mass laying which my bronzes are known to do. I got a crazy number of eggs from one particular laying and only collected about 2/3 of them. They weren’t sticking to the sides of the breeder box and I had a fairly poor hatch rate despite doing a methylene blue treatment the first day and having abundant (well, some, maybe not quite abundant) tannins in the water. Pics of the literal heaps of eggs they laid last October. I’ve never seen them pile them up like they did over the course of a couple days. 🤷🏻♀️ 2 4 Link to comment Share on other sites More sharing options...
FLFishChik Posted October 4, 2023 Share Posted October 4, 2023 @Odd Duck that’s what my tank looked like Monday morning. Unfortunately, this is all I managed to save and I don’t think these are fertile 2 Link to comment Share on other sites More sharing options...
nabokovfan87 Posted October 4, 2023 Share Posted October 4, 2023 On 10/4/2023 at 7:42 AM, FLFishChik said: that’s what my tank looked like Monday morning. Unfortunately, this is all I managed to save and I don’t think these are fertile They look like they are! It's definitely a skill and it's so tough. I was elated when I got mine to spawn, then I tried to move the eggs to the tumbler and I was in sheer panic and frustration. I feel for you and the experience you had, needless to say. 2 Link to comment Share on other sites More sharing options...
Odd Duck Posted October 4, 2023 Share Posted October 4, 2023 On 10/4/2023 at 9:42 AM, FLFishChik said: @Odd Duck that’s what my tank looked like Monday morning. Unfortunately, this is all I managed to save and I don’t think these are fertile It definitely is a bit of a trick moving them. Keep trying, you’ll get the feel for it. 1 Link to comment Share on other sites More sharing options...
FLFishChik Posted October 4, 2023 Share Posted October 4, 2023 On 10/4/2023 at 3:10 PM, nabokovfan87 said: They look like they are! It's definitely a skill and it's so tough. I was elated when I got mine to spawn, then I tried to move the eggs to the tumbler and I was in sheer panic and frustration. I feel for you and the experience you had, needless to say. If I can manage to master hatching Albino Cory eggs, then perhaps eventually, I'll give Panda's another try. 3 Link to comment Share on other sites More sharing options...
GoofyGarra Posted October 4, 2023 Share Posted October 4, 2023 On 10/4/2023 at 3:10 PM, nabokovfan87 said: It's definitely a skill and it's so tough. I was elated when I got mine to spawn, then I tried to move the eggs to the tumbler and I was in sheer panic and frustration. I feel for you and the experience you had, needless to say. yeah, my first 30tries at breeding my albinos the eggs just didnt hatch, it gets easier with practice, you figure out your optimal setups as well as learn skills like telling fertile from unfertile eggs. 1 Link to comment Share on other sites More sharing options...
Matt B Posted October 4, 2023 Share Posted October 4, 2023 I entertained our freinds kids, (and their parents), ..with my wine barrel ponds full of guppies!! So awesome to see others getting as much fun out of this as I do! They were all very interested in the aquariums. But the ponds were a hit! The hands on (and in) was what everyone loved! Sooo much fun!! 4 Link to comment Share on other sites More sharing options...
nabokovfan87 Posted October 5, 2023 Share Posted October 5, 2023 On 10/4/2023 at 3:13 PM, FLFishChik said: If I can manage to master hatching Albino Cory eggs, then perhaps eventually, I'll give Panda's another try. Hey... if I can do it, you can master it. 🙂 You got this. Corydoras are fun and it's just about the long term. Thankfully they will spawn again. Just a matter of time. 2 Link to comment Share on other sites More sharing options...
FLFishChik Posted October 5, 2023 Share Posted October 5, 2023 (edited) On 10/4/2023 at 10:21 PM, nabokovfan87 said: Hey... if I can do it, you can master it. 🙂 You got this. Corydoras are fun and it's just about the long term. Thankfully they will spawn again. Just a matter of time. Sadly, I did not manage to hatch any. Woke up this morning and they were fuzzy😢. Will try again and be better prepared. Dang it! I was looking forward to growing my own fish! Edited October 5, 2023 by FLFishChik 1 Link to comment Share on other sites More sharing options...
FLFishChik Posted October 5, 2023 Share Posted October 5, 2023 Well. That didn’t take long. No sooner disposed of fuzzy eggs and BAM… more eggs appear 😂. Her goes attempt No. 2 (I’ll be moving this to. Journal) 1 1 1 Link to comment Share on other sites More sharing options...
Ruud Posted October 6, 2023 Share Posted October 6, 2023 (edited) Got a new tank .... 60x35x38cm (23.6x13.8x15 inch) and 80L (a little over 21G) 6mm glass and rimless. Plan for this one is to keep it mostly bare bottom, put in perhaps a Java Fern or Anubias and I want to have a small colony of small Lnumbers - depending on what I can find here in Spain, perhaps L397 or similar size Hypancistrus or Peckoltia pleco up until more or less 110mm size. I know a source who grows L333 but they might end up a tad big to hold a group of 5 Got a spare Aquclear HOB kicking around, plus this might be a good tank to try again my luck with one of the Ziss filters I have for added bio filtering. Edited October 6, 2023 by Ruud Peckoltia, not Panaque.... duhh 3 Link to comment Share on other sites More sharing options...
anewbie Posted October 8, 2023 Share Posted October 8, 2023 Did a water change; so now the aquarium looks like this: This is a slightly older picture from the top: 1 Link to comment Share on other sites More sharing options...
CJhilljack Posted October 8, 2023 Share Posted October 8, 2023 Water change in my cube tank today, added wondershell & did some trimming & removal of floating plants to allow more light. My water wisteria was doing really well, but right after trimming & replanting, it suddenly turned brown & died, I also noticed the lily pads of my dwarf lily started dying and the leaves at the base have all become really tiny, no new pad shoots either. Last week, I did place new root tabs, I hadn't put any more in since initial setup in March, so I'm thinking it was past time. I moved my ricefish into the tank for the winter a couple of weeks ago - everyone seems to be doing well. 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now