EnderRen Posted December 19, 2022 Share Posted December 19, 2022 Yes, I know I should suck it up and buy a gravel vacuum / syphon hose, but I don't have the money this week. Next week that is the plan. The problem is, water still needs a changing. So, do I just stick a pitcher in my water and dump it in the sink, or is there another method that I should use? Link to comment Share on other sites More sharing options...
JJenna Posted December 19, 2022 Share Posted December 19, 2022 That's what I do...but I water my plants or dump water in my garden...excellent nutrients for non-aquarium plants. 1 Link to comment Share on other sites More sharing options...
EnderRen Posted December 19, 2022 Author Share Posted December 19, 2022 On 12/19/2022 at 8:28 AM, JJenna said: That's what I do...but I water my plants or dump water in my garden...excellent nutrients for non-aquarium plants. okay thanks! Link to comment Share on other sites More sharing options...
Hobbit Posted December 19, 2022 Share Posted December 19, 2022 Yep, a pitcher works just fine! When you pour the water back in, just put your hand under the water flow so it doesn’t stir up the mulm too badly. I still use pitchers sometimes if I don’t feel like getting out the hose. Link to comment Share on other sites More sharing options...
rockfisher Posted December 19, 2022 Share Posted December 19, 2022 I agree with above. However If you are super lazy or just always wondering and have time you can wick water out. Put some cotton twine and hang it out of the tank the tank and the other in a bucket. It will slowly wick water from the tank. It is slow and not very efficient but works. I’m I not sure how much you have but Lowe’s has 1/2 10 ft tubbing for about $6 dollar to use as a siphon and 1/4 inch 10ft for $4. Often times you can find damaged or returns items and ask for a discount. I use this cheap tubing for mine. 2 Link to comment Share on other sites More sharing options...
Tanked Posted December 19, 2022 Share Posted December 19, 2022 On 12/19/2022 at 9:52 AM, rockfisher said: Put some cotton twine and hang it out of the tank the tank and the other in a bucket. It will slowly wick water from the tank. It is slow and not very efficient but works. I should have used a bucket? One my early aquatic mistakes was inadvertently leaving a few threads of a cleaning towel in the aquarium. A few hours later it began rain in the basement.☔ 3 Link to comment Share on other sites More sharing options...
rockfisher Posted December 19, 2022 Share Posted December 19, 2022 On 12/19/2022 at 10:24 AM, Tanked said: I should have used a bucket? One my early aquatic mistakes was inadvertently leaving a few threads of a cleaning towel in the aquarium. A few hours later it began rain in the basement.☔ I that was how I knew as well. At least no rain just a wet spot on the floor. Link to comment Share on other sites More sharing options...
JettsPapa Posted December 19, 2022 Share Posted December 19, 2022 On 12/19/2022 at 8:52 AM, rockfisher said: I agree with above. However If you are super lazy or just always wondering and have time you can wick water out. Put some cotton twine and hang it out of the tank the tank and the other in a bucket. It will slowly wick water from the tank. It is slow and not very efficient but works. I’m I not sure how much you have but Lowe’s has 1/2 10 ft tubbing for about $6 dollar to use as a siphon and 1/4 inch 10ft for $4. Often times you can find damaged or returns items and ask for a discount. I use this cheap tubing for mine. I recommend getting some of that hose even if you do have an off-the-shelf siphon with the tube. I've done that with all of mine. I keep the tube and throw everything else away, including the bulb you use to start the siphon. You don't need it anyway. I start the siphon by lowering the tube into the water, then slowly bring it up, with the open end slightly higher than the end with the hose. As soon as water starts flowing I lower it back down into the water, still keeping the open end elevated. It doesn't always work on the first try, but it works. Anyway, I went to the local hardware store and bought 30' of hose for my large siphon. I run it outside for draining water from the 65, and to the shower drain for the 40. I use a smaller tube on the smaller tanks that I drain into my 2.5 gallon white bucket. That one has about 6' of hose, which is enough that I can set the bucket on the floor. 1 Link to comment Share on other sites More sharing options...
The endler guy Posted December 19, 2022 Share Posted December 19, 2022 On 12/19/2022 at 8:24 AM, EnderRen said: Yes, I know I should suck it up and buy a gravel vacuum / syphon hose, but I don't have the money this week. Next week that is the plan. The problem is, water still needs a changing. So, do I just stick a pitcher in my water and dump it in the sink, or is there another method that I should use? Do yourself a favor when you buy a siphon and get a python! Link to comment Share on other sites More sharing options...
EnderRen Posted December 19, 2022 Author Share Posted December 19, 2022 On 12/19/2022 at 10:33 AM, Aiden Carter said: Do yourself a favor when you buy a siphon and get a python! That was the plan 😜 (they are expensive though, so until then...) 1 Link to comment Share on other sites More sharing options...
The endler guy Posted December 19, 2022 Share Posted December 19, 2022 On 12/19/2022 at 10:35 AM, EnderRen said: That was the plan 😜 (they are expensive though, so until then...) I totally get that! The only downside with them is they can be a bit of a pain to set up and emptying the water from them after use is an entire game of twister! 1 1 Link to comment Share on other sites More sharing options...
AllFishNoBrakes Posted December 19, 2022 Share Posted December 19, 2022 On 12/19/2022 at 8:37 AM, Aiden Carter said: after use is an entire game of twister! So annoying to wind that thing back up, lol. And that last little bit of accumulated water that spits out from wrapping it up 🙄 Link to comment Share on other sites More sharing options...
rockfisher Posted December 19, 2022 Share Posted December 19, 2022 Just make sure the whole set up will fit on your faucets. I could replace my faucets or send back the python. I sent the python back. I have a a hose that runs to the fish room. Everything was had with that clear tubing but I use a bigger hose like @JettsPapaand one end has a hose bib attached. I run it outside near the hose bib to empty the tank and the just hook up the hose and full the tank. I have a pvp made hook. Dean shows how to make one or a few elbows and you can buy the hose and part for way less than a long python. I had a python and really think they are way overly rated. Some love them but I can do with out. They are not bad though. If you have/ get one I’m not saying it’s bad just a personal preference. Using both I just prefer the homemade one. Link to comment Share on other sites More sharing options...
AllFishNoBrakes Posted December 19, 2022 Share Posted December 19, 2022 @EnderRen You have just a 10 gallon tank, right? A Python is way overkill for a 10 gallon. I use my Python on anything 20 gallon high and up. For my smaller tanks I’ve built things like this for water changes. 1 1 Link to comment Share on other sites More sharing options...
The endler guy Posted December 19, 2022 Share Posted December 19, 2022 On 12/19/2022 at 10:47 AM, AllFishNoBrakes said: So annoying to wind that thing back up, lol. And that last little bit of accumulated water that spits out from wrapping it up 🙄 I know! I wish there was an easier way to empty the thing. I pity anyone who is short compared to where the faucet is Link to comment Share on other sites More sharing options...
castiel Posted December 19, 2022 Share Posted December 19, 2022 I only have a 5 gallon tank but I've used a (designated) turkey baster for water changes. Link to comment Share on other sites More sharing options...
The endler guy Posted December 19, 2022 Share Posted December 19, 2022 On 12/19/2022 at 12:20 PM, castiel said: I only have a 5 gallon tank but I've used a (designated) turkey baster for water changes. I like the sound of that idea especially if you have shrimp or fry Link to comment Share on other sites More sharing options...
TOtrees Posted December 19, 2022 Share Posted December 19, 2022 If this is just a temporary measure for a week or even a month, yes just use a pitcher and bucket. When removing water from the tank, put the spout of the pitcher in first, lower it in about half or 3/4 of the way, then tip it upright and lift the filled pitcher out of the water. When adding water back to the tank, presumably from a bucket, you can use the same pitcher, but lower the bottom of the filled pitcher into the tank first, then when the pitcher is deep enough in the tank that the water line in the tank matches the water line in the pitcher, slowly rotate the pitcher so it's sideways, then slowly lift it up and out so the spout is the last part to leave the water. This will result in the least amount of disturbance/flow/turbulence. [just make sure you don't place the pitcher onto a soapy sink or counter or anything] Link to comment Share on other sites More sharing options...
Bev C Posted December 19, 2022 Share Posted December 19, 2022 (edited) i have shrimp in my 10 gallon and i use a turkey baster only to it works very well if you know how to use it right ,, I squeeze the baster bulb and keep holding it before putting under water and slowly move baster around and slowly release the bulb to collect the mess on substrate matter fact it works great around rocks and plants in my larger tank too I tried a siphon when i first got my smaller tank and even with the smallest siphon it did not work well a turkey baster worked best for me Edited December 19, 2022 by Bev C Link to comment Share on other sites More sharing options...
nabokovfan87 Posted December 19, 2022 Share Posted December 19, 2022 The top fin siphon's are slightly narrower than normal, especially the medium or smaller sizes. I would look into those for a 10G so you have a slower flow of water leaving the tank and can control it slightly better. But yeah, I would just use a big cup / pitcher and a bucket for right now. Link to comment Share on other sites More sharing options...
Procrypsis Posted December 19, 2022 Share Posted December 19, 2022 (edited) Try airline tubing and a bucket. Edited December 22, 2022 by Procrypsis Link to comment Share on other sites More sharing options...
Rube_Goldfish Posted December 20, 2022 Share Posted December 20, 2022 On 12/19/2022 at 10:27 AM, JettsPapa said: I start the siphon by lowering the tube into the water, then slowly bring it up, with the open end slightly higher than the end with the hose. As soon as water starts flowing I lower it back down into the water, still keeping the open end elevated. It doesn't always work on the first try, but it works. This is how I do it, too. If you want to see this in action, Cory demonstrates here (the whole thing is worth a watch but the technique @JettsPapa is describing is at about the 2:00 mark): 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now