Thundercracker

I have nerite snails and don't want them to get mineral deficiencies. I am mainly asking because I was wanting to buy wondershells for my tank, but I don't know if I'm worrying about the snails for no reason. I read the nerite snail care article on aquarium co-op, but it doesn't say a baseline amount for this. I originally planned on also purchasing coral for KH, but I think that's mainly used for raising pH and the pH of the tap and tank water is higher than 7.0. If water parameters are needed, I'll be able to provide some tomorrow as it is quite late at the moment.

Might be, I have an HOB too, I'll clean the filter and the media to see if that works because that thing does get pretty dirty.

I've had this issue off and on for a while. Sometimes my tank will get bubbles at the top, even after a water change. I recently did about a 20% water change to my planted 29 gallon tank after I noticed the bubbles, because I was worried that the cause might hurt the animals, but the bubbles didn't go away. It has 5 baby guppies (~2 1/2 months old) and 2 nerite snails. There has been some foam at the top off and on since I've added the snails. The tank is cycled and it was fishless for about 4 months before I added 3 nerite snails, then 3 more. Then about two months after, I added the babies. I now only have 2 of the snails. I also use easy green and the aquarium co-op carbon for algae, but skipped both for this water change because I thought that it might be contributing. I haven't used either for the past three weeks. The water parameters a day before the water change were: Iron: 0 Copper: 0 Nitrate: 25-50 ppm Nitrite: 0 Chlorine: 0 GH: 75-150-300 (I couldn't really tell) Total Alkalinity: 120-180 ppm KH: 120-180 ppm pH: 8-8.4 Today, the water is: Iron: 0 ppm Copper: 0 ppm Nitrate: 25-50 ppm Nitrite: 0 ppm Chlorine: 0 ppm GH: 150-300 ppm Total Alkalinity: 120 ppm KH: 120 ppm pH: 7.8-8.4

Aw man, I was thinking the same thing when I saw him.

Here is a swimming video: https://imgur.com/a/ExmF3Rq Here is another video and some pictures: https://imgur.com/a/wiirIQs

I believe that the torn fins might be from the other animals in the tank because I saw one of the females go behind and nip at his tail. I also saw one of the frogs bite him yesterday and today. Today's attack by the frog was pretty bad because he wasn't really able to swim well. In the photo he's arched kind of like a cane and he swims in that position as well. I think he's had torn fins for about one and a half weeks, I hadn't really noticed until just now. Iron: 0 ppm Copper: 0 ppm Nitrate: 10 ppm Nitrite: 0 ppm Chlorine: 0 ppm GH: 75-150 ppm Alkalinity (TA): 120 ppm KH: 120 ppm pH: 8-8.4 Ammonia: 0 ppm

Update (10/30/2023): Unfortunately he passed away in the night on the 23rd. Thank you to everyone for your help. Updated version now that I'm not as busy: "Should I put him down? I got possible causes (ammonia/nitrate burn) on a forum and have been treating him with aquarium salt and increasing dosage amount for about two weeks according to aquarium co-op salt recommendations: 1 tablespoon of salt per 3 gallons of water for one week, then 1 Tbsp of salt per 2 gallons of water when that didn't work. I didn't increase to 1 Tbsp of salt per gallon because I have dwarf frogs, but I have put him into a separate bucket today because he was being attacked by the frogs, so I am now able to treat him with the 1 Tbsp/gallon if recommended. I also treated him with 1/4 teaspoon methylene blue and 1 tablespoon aquarium salt for one gallon for 30 minutes about every other day for about a week. I wanted to do one a day, but my brother goes to sleep early to go to school early so I couldn't go into his room all the time. I am also willing to do: Add 1 teaspoon (5 ml) of 2.303% Methylene Blue per 10 gallons of water. This produces a concentration of 3 ppm. Continue the treatment for 3 to 5 days. Make a water change and replace the filter media at the conclusion of the treatment. Add 5 teaspoons (24.65 ml) per 3 gallons of water. This produces a concentration of 50 ppm. It is not recommended that the concentration be increased beyond 50 ppm. Place fishes to be treated in this solution for no longer than 10 seconds. Return fish to the original aquarium. As a note: The methylene blue will go into the bucket and not the main aquarium. Could it be something else he is also suffering from that I can treat like dropsy or something and then after I treat that I start to treat the burn again? You can look at my posts and check his before photos from before he got sick as well as when he just started to show signs of ammonia burn. I just really don't want to put him down if I don't have to. It's a 20 gal. long tank with 5 guppies and 3 African dwarf frogs. Measurements are in ppm Iron: 0 Copper: 0 Nitrate: 10 Nitrite: 0 Chlorine: 0 GH: 75-150 Alkalinity (TA): 120 KH: 120 pH: 8-8.4 Ammonia: 0 Photos from a few weeks ago: https://imgur.com/a/SCM04Pm" Original: "Should I put him down? I got possible causes (ammonia/nitrate burn) on this forum and have been treating him with aquarium salt and increasing dosage amount for about two weeks according to aquarium co-op salt recommendations up to the one where it says a certain amount of salt for two gallons, the second step (I don't remember; I'm super busy and don't have time to check). I also started to treat him with 1/4 teaspoon methylene blue and 1 tablespoon aquarium salt for one gallon about every other day for about a week. I wanted to do one a day, but my brother goes to sleep early to go to school early so I couldn't go into his room all the time. Could it be something else he is also suffering from that I can treat like dropsy or something and then after I treat that I start to treat the burn again? You can look at my posts and check his before photos from before he got sick as well as when he just started to show signs of ammonia burn."

Would it be alright to do a methylene blue dip with aquarium salt in a separate bucket? Or just the aquarium salt in the tank to avoid stressing him out?

I have a guppy that I'm pretty sure has ammonia/nitrite poisoning. I've been doing 50% water changes everyday for two days (so far) with prime conditioner. I think he's injured, but I'm not sure which would be better to treat him with: methylene blue, (just) aquarium salt, or something like Maracyn. I first saw methylene blue for ammonia burn on YT by Luke's Goldies, but I've seen other people treating it with aquarium salt. I also read a review on aquarium co-op that says that they used Maracyn and it helped their fish that had ammonia burn. I'm not sure which to choose or if there's something better to treat this with. I'm also not sure if I should follow the instructions on the package, an article by Spruce Pets, or Luke's treatment. Luke's is about half of a 5 gallon bucket of water with 1 tablespoon of salt per gallon and 1/4 to 1/2 teaspoon of methylene blue per gallon. Then put the fish in the bucket for 30 minutes, then return the fish back to the tank and repeat once daily until they appear better. The article's recommendation has two treatment options with one being for a longer period of time or a dip. The first treatment is pretty close to Luke's, but doesn't include the aquarium salt. I'm not sure if I should do the dip because it lists the dip as helping with those that have cyanide poisoning and I'm worried about the dip being too much for my guppy to handle: Add 1 teaspoon (5 ml) of 2.303% Methylene Blue per 10 gallons of water. This produces a concentration of 3 ppm. Continue the treatment for 3 to 5 days. Make a water change and replace the filter media at the conclusion of the treatment. Article dip recommendation: "You can also use Methylene Blue as a dip for treating fish with... those suffering from cyanide poisoning" Prepare a nonmetallic container of sufficient size to contain the fish to be treated by adding water similar to the original aquarium water. Add 5 teaspoons (24.65 ml) per 3 gallons of water. This produces a concentration of 50 ppm. It is not recommended that the concentration be increased beyond 50 ppm. Place fishes to be treated in this solution for no longer than 10 seconds. Return fish to the original aquarium. If it is best to use Maracyn, how should I dose? I was thinking of following the aquarium co-op dosage used for Maracyn: add 1 packet of Maracyn per 10 gallons. After 1 week has passed, change out 30% of the water in the aquarium. Resume feeding the fish, keep the water quality high, and watch for any change in symptoms. If you have very weak fish, it may be easier on their bodies to space out the treatment. Bacterial infections are the most common, so use Maracyn first for a week, but I don't know what to do if the symptoms change. What do I do if the fish gets better or worse? What do I do after 1 week? For the aquarium salt, I would get a hospital tank for the fish as I do not notice the other fish in the tank having anything wrong. I would then follow the instructions on https://www.aquariumcoop.com/blogs/aquarium/aquarium-salt-for-sick-fish to treat the guppy, but I'm not sure if this is appropriate treatment for him. I'm mostly not sure because this is my first tank and my guppy is small and has been exposed to the substance for a bit (I just posted about his condition yesterday if you would like more info). Luke's treatment is used to treat pretty large goldfish and includes aquarium salt, which I'm kind of worried about because my fish is a little bit weak from the ailment and might get overwhelmed from the treatment because of his size and the saltiness of the water (he is also a drama queen and is pretty reactive to stressful situations). The Spruce Pets website says that it's vet approved, but I don't know if I should go for the dip or a longer treatment time, because the fish is small and weak. Or if I should just follow the treatment recommendation according to the instructions on whatever methylene blue package I purchase.

@Colu Would you say that it is ammonia/nitrite poisoning? (Sorry about the above single letter, I couldn't figure out how to exit out of the quote option). https://imgur.com/a/6v6bPPW

Just added them! I'm doing ammonia rn

One of my guppies was moved to a different tank, 20 gal long with 3 African dwarf frogs and 1 other male guppy. He began to rub against the substrate a lot after this change. A few weeks later he appears to have become dull, his top fin is split vertically, a droopy tail, not eating as much as he used to, as well as lethargic. He does stop drooping to swim faster if he gets scared or another fish gets too close to him. I haven't noticed him getting attacked by the other male and I haven't seen him rub against the substrate for a while either. I'm not sure what is wrong with him as this is my first tank. The raised scales in the photo appear more like damage in-person, but I may be wrong. (The image with the thermometer is him before he was moved) pH ~7.2-7.8 (using dipping sticks and can't really tell the colors apart) Nitrates ~25-50 ppm Hardness ~75-150 ppm Nitrite 1ppm Ammonia ~0-0.25 ppm (closer to 0 ppm than 0.25 ppm) KH/Buffer 80-120 ppm Water Temperature 78°F

I have a baffle on the Aqueon QuietFlow 20 filter and I don't know if it's inhibiting the oxygenation. I think it might be fine because the box says that the step that adds oxygen is before the water exits the filter/enters the baffle, but I have been having a lot of unexplained snail deaths and just wanted to make sure that wasn't one of the reasons why they were dying. (I just fed my 5 guppy fry so they are eating at the top of the tank in the video) https://imgur.com/a/y1yotug. Baffle: https://www.etsy.com/listing/769221604/the-original-aquarium-filter-baffles-3d

I have a long 20 gallon tank with 3 dwarf frogs; will the USB Nano Air Pump be able to sufficiently filter it on its own? I purchased the pump originally for my 10 gal with the nano sponge, but due to many factors, did not use it for that tank. If it is able to filter the tank sufficiently, should I get a different sized sponge than the nano? If so, what sizes of sponge is the nano compatible with?