Lds760 Posted December 20, 2021 Share Posted December 20, 2021 I have a 20 gallon long - cycled / well-seasoned tank with a HOB filter. I want to convert to a sponge filter to start a Cherry Shrimp tank. I plan to run both the HOB and the sponge filter in parallel for a while to get the sponge well populated with bacteria before removing the HOB (and before putting the Cherry Shrimp in). How long would this take? The answer is probably “it depends” but are we talking a few days or a few weeks? Any advice? Link to comment Share on other sites More sharing options...
Nuggets Beard Posted December 20, 2021 Share Posted December 20, 2021 I've replaced a canister filter with a Co-op sponge filter. I let both go for a month. Removed the canister. And nothing happened. All parameters remained the same. I think at least a month, a little longer to make sure. Link to comment Share on other sites More sharing options...
xXInkedPhoenixX Posted December 20, 2021 Share Posted December 20, 2021 I think a month is a comfortable amount of time as @Nuggets Beard said. Link to comment Share on other sites More sharing options...
Gigrantor Posted December 20, 2021 Share Posted December 20, 2021 I’d say a minimum of a couple weeks. Remember that there is also beneficial bacteria in the tanks environment to help out (Substrate, glass, ect). Between the two, it should give the sponge enough of a jump start. Link to comment Share on other sites More sharing options...
DaveO Posted December 20, 2021 Share Posted December 20, 2021 (edited) You can jump start your sponge filter quickly if you want to. Just get a bucket of your tank water and clean out the hob filter in it. Now get the sponge filter running, air stone and all, and run it in the bucket of bacteria laden water. Of course you need to reinstall the hob filter on the tank. After one or two days the sponge filter is good to go in the tank. Remove the hob filter after another week or so. Edited December 20, 2021 by DaveO 2 Link to comment Share on other sites More sharing options...
StevesFishTanks Posted December 20, 2021 Share Posted December 20, 2021 On 12/19/2021 at 9:27 PM, DaveO said: You can jump start your sponge filter quickly if you want to. Just get a bucket of your tank water and clean out the hob filter in it. Now get the sponge filter running, air stone and all, and run it in the bucket of bacteria laden water. Of course you need to reinstall the hob filter on the tank. After one or two days the sponge filter is good to go in the tank. Remove the hob filter after another week or so. Thats a great idea. I would use that method if you plan to not use the HOB anymore after switching. Personally I would keep both filters with a prefilter on the HOB 1 Link to comment Share on other sites More sharing options...
KaitieG Posted December 20, 2021 Share Posted December 20, 2021 I'd also probably just keep the HOB and stick a pre-filter on it if you don't have one already. I have shrimp doing great in a tank running a HOB with prefilter sponge. Link to comment Share on other sites More sharing options...
RonBFree Posted December 20, 2021 Share Posted December 20, 2021 In new tank I install the sponge filter and squeeze out a couple dirty sponge filters into the water. Link to comment Share on other sites More sharing options...
CalmedByFish Posted December 20, 2021 Share Posted December 20, 2021 Just a heads-up. Shrimplets (and fish fry) easily fit into the holes in a coarse sponge filter. For my shrimp, I removed the coarse sponge, and used rubber bands to wrap the intake in filter floss. (A sponge with tiny holes would've been better, but $, ya know.) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now