Jump to content
Watch our video on the rules of this forum.

Mmiller2001

Members
 View Profile  See their activity

  • Posts

    3,894

  • Joined

  • Last visited

  • Days Won

    11

  • Feedback

    0%

 Content Type 

Everything posted by Mmiller2001

  1. Mmiller2001
    BPS is irrelevant, that said 8bps for a 150 gallon seems extremely low. How are you diffusing CO2? FYI, anything over 75 gallons is going to need a reactor. Hopefully you are using one. For balancing, first thing I would do is triple check you are getting a solid 1 to 1.5 pH drop from degassed to peak CO2.
  2. Mmiller2001
    So you dose 2ppm three times a week. So that’s an accumulation total of 12ppm.
  3. Mmiller2001
    How often do you water change and how much
  4. Mmiller2001
    No, I’d go 5 if higher light. I’m at 10ppm in my own tank.
  5. Mmiller2001
    Drop it down to 2 or 3ppm. If you see GSA, raise it 1ppm until the GSA goes away.
  6. Mmiller2001
    I would buy MgSO4 (Epson salt) CaSO4 and K2CO3. All are inexpensive and will last a year or more. Ca and Mg for GH and the K2CO3 for KH if you want to add it. I personally don’t add KH to my RO water but some African species of fish will need it.
  7. Mmiller2001
    Again, pH swing does not harm fish. This is a wives tale. If GH and KH are stable (0dKH is stable), and the fish are in the appropriate/stable parameters, then pH is irrelevant. This wives tale is continually passed on by those who only read and regurgitate old and outdate knowledge. Let me know if you see dying or stressed fish here.
  8. Mmiller2001
    It doesn’t and pH swing doesn’t harm fish. Here’s my daily pH. Heres my tank as well.
  9. Mmiller2001
    I’d go with a ratio that brings GH down to 4 or 5 degrees, ignore KH.
  10. Mmiller2001
    If this was me, I would be concerned I didn’t have enough plants and would quadruple the plant load in the tank. Hopefully the EG arrives soon and start dosing at half the recommended until the plants start growing.
  11. Mmiller2001
    If this was me, I’d do another water change. I would also do 50% changes daily until no ammonia or nitrite are present.
  12. Mmiller2001
    You want a DTPA Iron and I would dose .35 to .45ppm Fe
  13. Mmiller2001
    What’s the average pH of the tank?
  14. Mmiller2001
    If it’s glued, just work it like removing a sticker.
  15. Mmiller2001
    They tie them together. Will need to cut and open the root ball.
  16. Mmiller2001
    I like black substrate and black backgrounds. Using a Moss wall can add dept and make certain color really shine. My tank is in transition so you can get a feel for both. I have a black substrate, a moss wall on the right and a Trip wall started on the back with areas of black showing still. Hope this can help you decide.
  17. Mmiller2001
    In my tank?
  18. Mmiller2001
    I had to replace one Bluetooth chip and noticed what you say, found out a few days ago there’s a v3 chip. He sent me v2 chips when I bought them. I use my own settings.
  19. Mmiller2001
    I do, 3xp600’s
  20. Mmiller2001
    Low CO2 would. I’d spot dose H2O2 and then do a couple of larger water changes. You could possibly lower light intensity a smidge and go from there.
  21. Mmiller2001
    Do you use CO2?
  22. Mmiller2001
    I thought I knew what direction I was going, but not so much now 😆. Tons of work yet to come.
  23. Mmiller2001
    Black Diamond Blasting Sand here. No washing and have Cory Cats.
  24. Mmiller2001
    I’d do a 60% or more. And then necessary water changes to keep it between 1 to 2ppm.
  25. Mmiller2001
    Plant the crap out off it but you need to do a huge water change and get that ammonia down below 2ppm.
×
×
  • Create New...