Bill Smith Posted October 30, 2020 Share Posted October 30, 2020 Just a reversed-bottle-style fish catcher, sized down for multi fry... Hi all: Catching shell dweller fry can be a real challenge, unless a tank is set up with separating them in mind. But if you're like me, and you have a nicely planted and decorated tank with happy multies who are breeding like guppies, and just need to get them out to prevent massive overcrowding, it's pretty much impossible to catch the little buggers without decimating the tank. They don't run into their shells, they hide low to the ground, under the shells, behind plant roots, etc. And they can be pretty fast. So I wasn't sure an adaptation of the simple bottle fish catcher would work if scaled down...but it does! This was my process: First, I sourced the right size bottle. It needed to have an opening that was small enough to keep out most adult fish, and also not be too large for smaller tanks. I settled on this 8 oz squeeze water bottle from Crystal Geyser: After pulling off the pull-top cap, I removed the screw-top lid. It conveniently has a divider to filter for really small fry, if you want. I didn't need it that small, so I clipped it out with a small pair of snips: I then cut the top off with my bandsaw, although a pair of scissors would have been just fine: The top part needs a small slit cut in it, so that when it is reversed and jammed back into the bottle, the edges will overlap slightly and it won't buckle. The slit is about 1/4" long: Then, in order to promote good circulation, I punched small holes all over. Although you can melt some with a red-hot nail (heated over a candle), a narrow tip on a soldering iron or wood burner works much better. 🙂 The top jams tightly into the bottle. No sealing is necessary, making it easy to separate later. I added some micro-pellets as bait, and placed it in my tank. After 8 hours, I pulled the bottle out; it had caught 16 fry! Big success on the first day! Subsequent days I only caught 3 at a time, but I'll get them all eventually. Placement really matters. I ended up making two more traps, so I can catch them faster. Fun, quick project, useful for the breeder's toolbox! Enjoy! Bill 11 4 Link to comment Share on other sites More sharing options...
Daniel Posted October 30, 2020 Share Posted October 30, 2020 @Bill Smith Your documentation of your projects is always the best. Great low cost easy to implement and effective project! 1 Link to comment Share on other sites More sharing options...
Mikey Walnuts Posted October 30, 2020 Share Posted October 30, 2020 This is such an awesome idea! I've been wanting to try and catch out some fry so I can take some clear photos for BAP points but I haven't wanted to destroy my set up. I'm going to have to run to the gas station and scope out water bottles 1 Link to comment Share on other sites More sharing options...
Arty Mars Posted December 6, 2021 Share Posted December 6, 2021 This is the exact trap I always used as a kid to trap Shrimp in the river for bait when fishing xD never thought to make one for catching fry in my aquarium haha ❤️ Link to comment Share on other sites More sharing options...
Hobbit Posted December 6, 2021 Share Posted December 6, 2021 I’ve had success with this style trap too! I’ve made two traps with different sized holes so I can use them to catch the medium fry out of my small-fry tank, and then the large fry out of my medium-fry tank. Here’s the trap catching medium fry: When I pull the trap out, I watch to make sure the small fry escape before completely pulling it out of the water. Since I’m using it to sort, I’ve had to try to make the edges of the holes as smooth as possible. I melt the holes in with a soldering iron, which produces a somewhat rough edge. I then pick off the melted plastic rim around each hole (it comes off fairly easily most of the time), and then use a Dremel to try to smooth them out even further. Smoothing from the inside is the hardest and most important part, since the fish don’t usually aim directly at the hole. Most of the time they have to “slide” into it as they’re trying to swim through the plastic. It’s not perfect, but I haven’t had any visible injuries yet, even when the fish end up getting stuck half-way out a hole. 😄 (They do need some help getting unstuck. It’s the only time I’ve ever booped a fish.) 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now