DiscusLover Posted April 20 Share Posted April 20 My fx2 that I recently bought a month ago started losing its flow a lot out of nowhere. I could not figure out what was causing the issue so I took all the media in the filter and cleaned it throughly, took off the motor parts and cleaned it as well. Put it all back together and its still running with poor flow. There is not broken parts and nothing is clogging the input and output either, so I am kinda stumped if its something with the motor. 1 Link to comment Share on other sites More sharing options...
Ken Burke Posted April 29 Share Posted April 29 No idea, but have you called customer support? https://fluvalaquatics.com/us/contact-us Link to comment Share on other sites More sharing options...
nabokovfan87 Posted April 30 Share Posted April 30 On 4/19/2024 at 8:36 PM, DiscusLover said: There is not broken parts and nothing is clogging the input and output either, so I am kinda stumped if its something with the motor. flow in = flow out, so I would verify tubing isn't kinked, valves slightly shut, or anything like that. Absolutely contact fluval and verify things with them. If there is anything wrong with the impeller / pump you'll notice it on the shaft itself and on the impeller magnet. It may have just lost charge, need lubrication (100% silicone grease), or something is allowing it to float out of alignment. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now