svachon9 Posted October 30, 2023 Share Posted October 30, 2023 Starting a 90 gallon - low tech- medium plants- high fish load-community tank (Angels, tetras). Using well water- RO is not an option) KH is good. GH is my problem. Two options for water 1- Water from water softener - GH 90pm- I'll add calcium as it is low. 2- us the well water - GH - 450ppm. I'm not picky on my type of plants, I plan on low tech-easy plants. But the I'm concerned about angels in 450ppm GH water. Link to comment Share on other sites More sharing options...
Galabar Posted October 30, 2023 Share Posted October 30, 2023 (edited) A water softener will replace calcium and magnesium with sodium and potassium. Some seem to have luck with softened water while others don't. Remember, that 450 ppm of calcium and magnesium will be replaced with an equal amount of sodium and potassium. Edited October 30, 2023 by Galabar Link to comment Share on other sites More sharing options...
KickAss Posted October 30, 2023 Share Posted October 30, 2023 Get locally bred angel and I guess it's not an option for you so, here's what ill do- get angels that are not too much finniky i.e. no new strains, get old established strains like- black, platinum/diamond, marbled, wild etc., Add them to softened water and then slowly over the period of month or 2 aclemetize them to your natural water source. Most will get aclemetized, try your luck. GL;HF. Link to comment Share on other sites More sharing options...
nabokovfan87 Posted October 30, 2023 Share Posted October 30, 2023 On 10/30/2023 at 11:57 AM, svachon9 said: Starting a 90 gallon - low tech- medium plants- high fish load-community tank (Angels, tetras). Using well water- RO is not an option) KH is good. GH is my problem. Two options for water 1- Water from water softener - GH 90pm- I'll add calcium as it is low. 2- us the well water - GH - 450ppm. I'm not picky on my type of plants, I plan on low tech-easy plants. But the I'm concerned about angels in 450ppm GH water. Basically, California water right there. Should be fine for a lot of things. Val has worked, bacopa, s.repens, microsword, anubias does awesome as well as moss. Because you're on a well, RO is recommended. That being said I wouldn't chase parameters, there isn't a lot of issues with the water right from the tap. Link to comment Share on other sites More sharing options...
svachon9 Posted October 30, 2023 Author Share Posted October 30, 2023 Honestly the more I think about it, I'm 63 and don't want make RO in my basement and haul 6 or 7, 5-gallon bucket for water changes. So, I'm trying the water softener/Angel/plant option first. If that does not work, it's likely the plants that die and not the fish, so I'll lose the plants and it that fails, I'll just go the hard well water and go with Ciclids. 1 Link to comment Share on other sites More sharing options...
Galabar Posted October 30, 2023 Share Posted October 30, 2023 (edited) I think the most important thing I've picked up here is "don't fight your water." Going with what you have first (softened) and then trying the hard seems like a good plan. In the Seattle area, we (I) have TDS < 30, KH < 1, and GH < 1. So, I add a little SeaChem Equilibrium and Alkalinity Buffer to get those to 4 KH and 4 GH. However, if I didn't, I think my fish would still be Ok, and plants might grow just a bit slower. It's easy, so I do it. Also, I agree, buckets suck... 🙂 Edited October 30, 2023 by Galabar Link to comment Share on other sites More sharing options...
Biotope Biologist Posted October 31, 2023 Share Posted October 31, 2023 You can also soften water a ton with heavy organic load if that is an option for you. But also angels are not terribly finicky about the gh like common belief. Neither are discus. They possess a remarkable ability to push ions across their gills mechanically when magnesium and calcium are not present in the water, but if the water is not lacking in these then they do not need to use the ability and they live just fine, happy as clams. Many, many people have had success with both angels and discus in hard water. Link to comment Share on other sites More sharing options...
svachon9 Posted October 31, 2023 Author Share Posted October 31, 2023 I think maybe the answer here is something like 60% soft water and 40% hard/well water. Switching between the two is easy for water changes. So maybe my HG is around 180-200 ppm which should be fine for angels and plants. And I get some Ca back with a lot less sodium. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now