Jump to content

Mmiller2001

Members
  • Posts

    3,896
  • Joined

  • Last visited

  • Days Won

    11
  • Feedback

    0%

Posts posted by Mmiller2001

  1. BPS is irrelevant, that said 8bps for a 150 gallon seems extremely low. How are you diffusing CO2? FYI, anything over 75 gallons is going to need a reactor. Hopefully you are using one. For balancing, first thing I would do is triple check you are getting a solid 1 to 1.5 pH drop from degassed to peak CO2.

  2. I would buy MgSO4 (Epson salt) CaSO4 and K2CO3. All are inexpensive and will last a year or more. Ca and Mg for GH and the K2CO3 for KH if you want to add it. I personally don’t add KH to my RO water but some African species of fish will need it.

  3. On 3/24/2024 at 1:04 PM, Mikon77 said:

    I definitely want what’s best for my fish. I don’t want to risk ph swings harming them

    Again, pH swing does not harm fish. This is a wives tale. If GH and KH are stable (0dKH is stable), and the fish are in the appropriate/stable  parameters, then pH is irrelevant. This wives tale is continually passed on by those who only read and regurgitate old and outdate knowledge.

    Let me know if you see dying or stressed fish here.

     

  4. On 3/23/2024 at 12:26 PM, Whitecloud09 said:

    @Tony s, I did a water change and everything, just checked and now it’s .50 ppm. So….wait right? Then recheck tomorrow. Might need to do another one again tomorrow.

    If this was me, I’d do another water change. I would also do 50% changes daily until no ammonia or nitrite are present. 

    • Like 3
  5. I like black substrate and black backgrounds. Using a Moss wall can add dept and make certain color really shine. My tank is in transition so you can get a feel for both. I have a black substrate, a moss wall on the right and a Trip wall started on the back with areas of black showing still. Hope this can help you decide.

    IMG_1017.jpeg

    • Love 2
  6. On 3/20/2024 at 1:16 PM, knee said:

    Nice! I love week Aqua. Not sure if you did this already but they came out with a new Bluetooth chip and it makes the ramp up/down smoother instead of it jumping to a different brightness. 
     

    Do you use the presets or did you make your own light settings? 

    I had to replace one Bluetooth chip and noticed what you say, found out a few days ago there’s a v3 chip. He sent me v2 chips when I bought them.
     

    I use my own settings.

  7. On 3/20/2024 at 12:16 PM, Whitecloud09 said:

    No I don’t. would that cause algae if I had it?

    Low CO2 would. I’d spot dose H2O2 and then do a couple of larger water changes. You could possibly lower light intensity a smidge and go from there.

    • Thanks 1
×
×
  • Create New...