Jump to content

FrostiesFishes

Members
  • Posts

    220
  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by FrostiesFishes

  1. After some serious research in my fish med books and online. I’m fairly certain that it is dropsy. The signs being bloat and possibly pop eye. I suspect I dropped the temp to much during the water changes recently and caused stress to the fish and she got it from a bacteria that is as I understand it always in aquariums. The info I’ve found says a qt/salt bath tho, I think I’m past that point. It also recommends Erythromycin and if it is a gram negative bacteria to use Amoxicillin and I can’t get that locally (chewy has it online) And I really don’t know how to tell if it is gram negative? But hopefully this info will help someone in the future searching for answers about bloat/drop set. And anyone with experience with curing this or info please feel free to respond as to what or how to tell if a bacteria is gram negative. 

  2. Hello, I wanted some opinions of this angelfish’s health.  I checked the water and everything is reading o ppm before and after the water change. But she is very swollen and doesn’t seem to be eating. But she also haven’t laid eggs in at least three weeks. Also odd as she was spawning every 14 or so days. And I’m starting to think she has pop eye but I’m not real sure, I put some salt in the tank at 2 tablespoons for the twenty gallon. And have been feeding frozen brine and bbs to try and she if it is bloat. Any ideas? 

    457F7817-E8E2-4C03-8C87-285D474CDBBB.jpeg

    3C990268-DE96-437D-81D1-C4EC42770970.jpeg

    A95CD0B1-F7B1-49CF-A02E-38B9592665AF.jpeg

    88F3B319-0F28-4D37-96DB-714FA1912A58.jpeg

    6FBEB36A-7D82-4535-96F7-C6207C9148E1.jpeg

  3. I tired a trio and the dominant female just bullied the other female and I didn’t get any breeding action. I eventually moved the single female and paired her with another smaller male. The trio was a heavily planted tank but it didn’t have a large foot print so that may have been my issue. I typically divide a 20 long so I can get to pairs in a tank 

    7CB72602-2B20-491F-9030-488955487F29.jpeg

    • Thanks 1
  4. I just colony breed them with pvc, and I can attest that the pvc makes so much easier to collect them. I did hold a small group in a tank with no shells for awhile and it didn’t seem to adversely effect them. But I didn’t have some Java ferns on wood. 

    • Thanks 1
  5. @Rhonda moving plants over will help kick start the system. If your tank has a sponge filter or maybe a sponge in a hob filter, just get some mulmy water off that as if you were cleaning it and add that water to the tank. But honestly moving some plants will be enough. Just be patient with adding livestock and don’t overload the system prematurely. 

    • Thanks 1
  6. So this is going to be a hot topic response but I have seen mentioned on angelfish specific resource forums in the past. That if it is genetic and you cut the fin back it will not regrow correctly. But if it is from poor water conditions, or a small tank if you trim the fin it will grow back correctly. Now I’ve never seen this done or know how far back to trim. Nor do I have an opinion on that ethics of this. Just giving you the information. 

  7. @s1_ what was the issue feeding the fry, and I put a air stone on the bottom of the line so that couldn’t happen to me. I don’t know about the issues mentioned about the fry during in the foam, I normally don’t move them to the jar till they are free swimming. And I don’t worry about the bad eggs, because I put the jars in 29gal and even with three jars going I’ve never had an issue with water problems, I actually put a bladder snail in the jar with the fry to clean up 

  8. I don’t think it would work out well for the above mentioned issues, the best way I’ve found to raise angelfish eggs is in a jar. And then when they hatch move them to a grow out tank or use the angelfish breeding jar from angels plus

    • Thanks 1
  9. Hello, I just wanted to share my 72 bow front angelfish tank. I wanted to have high coverage Koi angelfish in it for along time so I decided to get 6 juv fish, grown them up and breed them and pick from that first pairs spawn for this display tank. Here are the results. It’s kinda a jungle mess right now but I didn’t wanna trim it today. I may add a group of rainbows but I’m not sure just yet.

    6428C2C8-B043-4F35-A1E9-95043C99D9A4.jpeg

    F67CA2F5-1F64-43B5-80C5-DCF90B4BB22F.jpeg

    EBEB98FD-68FE-445C-998E-E1F667268586.jpeg

    2D3D8422-8F6A-410E-8645-A5906623762C.jpeg

    • Like 1
  10. They should take any water, they will lay eggs daily with a spawning mop. I would recommend getting vinegar Eels as a first food. But you can do without. I breed all kinds of rainbows and they are super easy just have to get a pair. Any questions feel free to ask I will answer to best of my ability. Granted I haven’t bred these but most rainbows grow very slow and require clean water. 

  11. A little late to the party but I think they’re both males, typically that purple stripe on the back is a sign of a male, and you’ll see that much earlier then the typically color change and large fins of a male. But I had a pair spawn like crazy for two months, moved them into a larger tank and it stopped. And they haven’t spawned for me in months at this point. So if you did in fact have a pair. They may just be stubborn. A lot of times the biometric pressure and the amount of time the light is on also can effect them.  I’d try some cold water changes maybe shorten the lights on time, you could also use a mirror to try and stimulate the male. I’ve heard of this working from lots of research but it hasn't done me any good yet. And lastly let me start by saying I do not recommend it unless you’re on the more experienced side. But You can allow the water level to drop and the water quality to go down and then do a water change. I know this tactic has been known to work by some well known breeders. 

    • Haha 1
×
×
  • Create New...