BlueLineAquaticsSC Posted May 19 Share Posted May 19 I don’t know much about the galvanized tubs If I cleaned the rust off of this stock tank would it just come back right away since it’s already started to rust and if so is there anyway to prevent it Link to comment Share on other sites More sharing options...
Tony s Posted May 19 Share Posted May 19 There may be, or at least slow it down. They make a paint that binds to rust and hardens. Changing colors from white to black as it does. We have used it before on steel projects we were building. But those projects were not constantly submerged after. If you have something like an Ace hardware with a paint department, I’d check with them. Needs to have metal specific paints, not sure big home stores will have what you need. Possibly tractor supply. Not even sure about Sherwin Williams as they handle mostly house paint. btw, 50+ years ago, we had one of those in our back yard. 12 ft wide. It was our first swimming pool. It was actually very fun. We used to be able to create a giant whirlpool in it 🤣 1 Link to comment Share on other sites More sharing options...
doktor zhivago Posted May 19 Share Posted May 19 The galvanization is a sacrificial anode. Once it's gone it doesn't protect the steel anymore 1 Link to comment Share on other sites More sharing options...
Tony s Posted May 19 Share Posted May 19 On 5/19/2024 at 4:24 AM, doktor zhivago said: The galvanization is a sacrificial anode. Once it's gone it doesn't protect the steel anymore That is very true. @BlueLineAquaticsSC if you paint it, you’ll want to paint the whole inside of the tank. The area not in contact with the rust will stay white, but still harden just fine. The problem being, if you don’t cover all the rust, it will come back in that area Link to comment Share on other sites More sharing options...
gabdewulf Posted May 19 Share Posted May 19 Maybe paint it with the rust binder and then cover the inside with pond epoxy paint...see people using it in ponds but not sure if it's "fully" aquarium safe. 1 1 Link to comment Share on other sites More sharing options...
gardenman Posted May 19 Share Posted May 19 (edited) It appears to be mostly surface rust and not near a critical joint, so using it with a liner would be an option. "Pond Armor" is the brand of pond epoxy paint that You Tuber Aquarium Domain uses for his homemade tanks. Edited May 19 by gardenman 1 Link to comment Share on other sites More sharing options...
Tony s Posted May 19 Share Posted May 19 On 5/19/2024 at 7:44 AM, gardenman said: It appears to be mostly surface rust and not near a critical joint, so using it with a liner would be an option True, but eventually it will go through. It’s not that thick. And just painting over won’t stop the rust. It’ll just eat through the painted liner. @gabdewulf I like that idea. I was going to suggest painting, but pond liner should be great. Link to comment Share on other sites More sharing options...
Pepere Posted May 19 Share Posted May 19 On 5/19/2024 at 8:11 AM, Tony s said: And just painting over won’t stop the rust. It’ll just eat through the painted liner. I have used epoxy over rust on cars that has effectively stopped the rust progression for years. Epoxy makes a tenacious waterproof bond to rust unlike polyester or vinylester resin that suffers from osmotic blistering and allows water to pass. if you try it, I would sand remove the loose rest and wash it well let it dry thoroughly. Then paint on straight epoxy and allow it to cure. Then I would sand the epoxy to give it some tooth and coat with the epoxy pond liner for an aesthetic finish and to protect the epoxy from UV degradation. 3 Link to comment Share on other sites More sharing options...
Tony s Posted May 19 Share Posted May 19 On 5/19/2024 at 8:21 AM, Pepere said: I would sand remove the loose rest Yeah, prepping the area well is going to be essential anyway. Sounds like a good reason to get a new cordless grinder and a wire wheel. Otherwise that’s a lot of elbow grease for the whole tank Link to comment Share on other sites More sharing options...
madmark285 Posted May 19 Share Posted May 19 (edited) As other suggested, Pond Armor Non-Toxic Pond Shield Epoxy Paint For the rust, you could try Rust-Oleum Rust Dissolver 32-fl oz Rust Remover Edited May 19 by madmark285 2 Link to comment Share on other sites More sharing options...
BlueLineAquaticsSC Posted May 19 Author Share Posted May 19 Thanks for all the suggestions, the seller hasn’t even got back to me yet if it’s available, but I’m starting to wonder if it will be worth the time getting right Link to comment Share on other sites More sharing options...
Pepere Posted May 19 Share Posted May 19 On 5/19/2024 at 11:01 AM, BlueLineAquaticsSC said: but I’m starting to wonder if it will be worth the time getting right It wouldnt be that exciting to me. I do recall watching one video where the person had a brand new galvanized tub that they scrubbed out with detergent to remove any oils or grease and sanded and then painted the interior with pond liner epoxy paint specifically to prevent the zinc galvanizing from leaching in to the aquarium water. I dont know if that is advisable but it did give a nice light blue surface to allow easier viewing of the fish…. 1 Link to comment Share on other sites More sharing options...
madmark285 Posted May 19 Share Posted May 19 On 5/19/2024 at 11:01 AM, BlueLineAquaticsSC said: but I’m starting to wonder if it will be worth the time getting right From Amazon link This looks nice to me. If I was doing this project. Rust dissolver then clean it with my high pressure washer. Use a leaf blower to quickly dry before it starts to rust again then spray on some primer over the rust spots. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now