johnnyxxl Posted March 10 Share Posted March 10 I have the 2 output Co-op air pump my airline keeps working off the nipples from it and the check valves. The check valves do seem to be a bit larger than I would have thought but it was a airline kit a friend gave me when I mentioned I was going to get the air pump. Is there a way to work the airline further up the nipples that I am forgetting to try? Link to comment Share on other sites More sharing options...
HelplessNewbie Posted March 10 Share Posted March 10 I learned from this forum: 1) try dipping the end in hot water for a number of seconds, to loosen enough to slip up the nipple 2) when redoing the connection using the same hose, cut off the enough of the worn end 3) can secure with zip tie or coated wire 4) if I oriented the check valve wrong or didn't make a bleed valve, the hose can pop off more easily 5) sand nipples before reconnecting for better grip Hope this helps! 2 Link to comment Share on other sites More sharing options...
johnnyxxl Posted March 10 Author Share Posted March 10 On 3/10/2024 at 11:32 AM, HelplessNewbie said: I learned from this forum: 1) try dipping the end in hot water for a number of seconds, to loosen enough to slip up the nipple 2) when redoing the connection using the same hose, cut off the enough of the worn end 3) can secure with zip tie or coated wire 4) if I oriented the check valve wrong or didn't make a bleed valve, the hose can pop off more easily 5) sand nipples before reconnecting for better grip Hope this helps! Will try I totally forgot about heating the airline, thanks 1 Link to comment Share on other sites More sharing options...
lefty o Posted March 10 Share Posted March 10 trim old ends off, warm it up if need be, or just toss it out. airline all eventually hardens to where its all but useless. 3 Link to comment Share on other sites More sharing options...
Tazalanche Posted March 10 Share Posted March 10 Especially if it is falling off the check valves, "hand me down" airline is not cost efficient. Spend the couple bucks for new airline & you'll have less worries about draining your tank into the floor. 1 Link to comment Share on other sites More sharing options...
johnnyxxl Posted March 11 Author Share Posted March 11 I think that the hot water helped, I think that the stuff came from an online shop as a kit because it was all sealed. It wasn't used stuff all new just not as easy fitting as I had remembered. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now