90 degree airline elbow

[BF McUmber]

I see on the website they have Tee and splice connectors on the website, but has the Co-op made elbow connectors in the past?   

I'm attempting to get my air line tube that goes into the sponge filter to be somewhat vertical as opposed to draping the air line on an angle. 

[Guppy Guy]

Here is an Amazon link for a set of 40 assorted ones. 

One idea too is to put some silicone in the 3rd hole of a tee to seal it, but I don’t know how long that would last.

I checked the coop’s website and found nothing. I assume it is only a matter of time though.

[BF McUmber]

On 8/22/2021 at 5:02 PM, Guppy Guy said:

Here is an Amazon link for a set of 40 assorted ones. 

One idea too is to put some silicone in the 3rd hole of a tee to seal it, but I don’t know how long that would last.

I checked the coop’s website and found nothing. I assume it is only a matter of time though.

We will try it out, I just packed some aquarium epoxy in the 3rd side just because it is quicker/easier. If that does not work I may try silicone or super glue and filter floss.  

[Guppy Guy]

Ok. Good luck 🤞 😉