[New Co2 Diffuser not working]

So @Buckman- I think I found the issue. Shitty safety valve -_- I hope I didn't damage the diffuser too much -_- 

[New Co2 Diffuser not working]

Yeah - it is interesting. The PSI on the outlet is actually decently high. 
The Diffuser is not letting air through. When I test - it actually comes out of the line a bit. You can see the bubbles. But its not nearly enough to do that. Maybe their is an issue somewhere in the line. I will redo the entire line tomorrow 😕

 

[New Co2 Diffuser not working]

Thanks for the response! 

 

I have a 22G Long - so the diffuser is about 10" under water.

The Co2 Source is a 5lb pressurized system with regulator. 

I have been testing in a shallow cup - and nothing will come out of the diffuser. My other diffuser was just fine - however, the bubbles were not as fine as these. 

 

I am actively soaking the diffuser in bleach - and testing every hour. 

 

I will keep you posted if I have success. Everything I have found online says a bleach soak is the solution 😕 but 3 hours in - and no success so far.

 

Edit: The diffuser worked very shortly within the bleach solution - and then quit working again. That is how I know the bubbles are much more fine then my previous diffuser - and why I am so steadfast on making this work 😛 

[New Co2 Diffuser not working]

Recently purchased the Co2 Diffuser from Aquarium Co-Op's website. Unfortunately, the bubles do not come out of the diffuser. The Co2 is coming out of the lining instead. This is not an issue with my other diffusers. 

Note: I do have Co2 lining. Is there a way to seal the tubing where it connects to the diffuser? I ruined my last one trying to super-glue it tight, and had to buy a 2nd -_-