Trevor.Prescott

CS e-mailed me back, and advised me to turn the bottom pressure relief valve 1/2 turn counterclockwise. Happy birthday to me, functionality has been restored. I'll keep an eye on the system close for the next couple days, but as of right now, things are going how they should be. I've had to interact with Co-op's CS twice, and they've been wonderful both times. Offered the best resolutions.

CS e-mailed me back, and advised me to turn the bottom pressure relief valve 1/2 turn counterclockwise. Happy birthday to me, functionality has been restored. I'll keep an eye on the system close for the next couple days, but as of right now, things are going how they should be. I've had to interact with Co-op's CS twice, and they've been wonderful both times. Offered the best resolutions.

Good to know I'm not the only one. I sent an e-mail to CS right before posting here, so that's off and runnin'. I just tried degassing, taking the reg off, the putting it back on, re-gassing, and the Operating Pressure was still at, or very close to 0. Obviously a bummer, but I have faith in the CS team; I've had nothing but good interaction with them in the past. This regulator didn't even last 1 full day.

I set up the co-op regulator yesterday, and everything was working as intended. All levels were within the ranges suggested in the instructions. Operating gauge was at 45, bubble counter at about 1 bps. Today, the operating pressure is at, or almost 0. I cannot turn the operating pressure vale anymore to the right. The cylinder pressure gauge looks the same, or close to what it read yesterday. What do I do?