Nephro
-
Posts
44 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Forums
Downloads
Store
Events
Blogs
Gallery
Profiles
Posts posted by Nephro
-
-
-
-
-
-
-
-
I personally would use 1/4 poly foam or even a bit of yoga mat on all 4 corners it’s how I install all my tanks especially if 40 breeder or smaller.
-
-
Here’s a pic of my bbs hatchery system. Look familiar, it is, thank you Dean.
-
*wiping with a tack cloth
-
Nice build and great job for your first project. A couple things I might add is the broken bits are usually from not holding drill straight in and straight out. Also using a countersink bit can allow you to hide the screws relatively easy. Also a deck of cards are a great way to perfectly level a stand. Also when using the water based poly applying a couple coats and then sanding with 220 paper until hazy and smooth then reapplying another coat will lend a nice smooth coat. Also warping down with a rack cloth after sanding will avoid those little dimples you were getting in the finish. Here’s a stand I built very similar to yours.
- 2
- 1
-
Now plopping in quarantine tanks for a few weeks
-
Gold laser corydoras
-
-
Pardon my horrible texting ughhh
-
Thank you. Now that I have the equipment I can keep an eye out for other large 150,200,300 gallon boxes of glass. Lol and I’m fortunate my girlfriend seems to e joy them as long at the room has a livable atmosphere.
-
Those are awesome, very clean look. I’m jealous of your Val I seem to struggle with the stuff.
- 1
-
-
Zeke had to be a big fella to keep the oscars in line.
- 1
-
-
-
I agree with Isaac that it’s not necessary, I’m not an engineer, but lots of real world building experience.
- 3
-
-
Nephro's Fishroom
in Photos, Videos & Journals
Posted
Had a mishap with the 180 gallon tank. The center glass brace decided to let loose so instead of trying glue it back in place my father and I welded up a stainless brace that will support the tank from the outside instead.