a date with nature Posted December 8, 2023 Share Posted December 8, 2023 https://www.thingiverse.com/thing:3614079 This makes me slightly mad, seeing as i gave up on trying to find a good overflow system and built a fish rack without them. But the fact that this has flown under the radar is unacceptable to me. Here is a youtube vid that also covers it. 1 Link to comment Share on other sites More sharing options...
madmark285 Posted December 8, 2023 Share Posted December 8, 2023 I was debating on making something similar to this using PVC trim material from Home Depot. For redundancy, it should have 2 siphon tubes just in case. Link to comment Share on other sites More sharing options...
Galabar Posted December 8, 2023 Share Posted December 8, 2023 (edited) That's just using a lift tube, similar to: https://www.amazon.com/Seapora-56097-Overflow-Pre-Filter/dp/B07659MBC7 https://www.amazon.com/CPR-CS50-Overflow-Box/dp/B01IO93LO0 https://www.amazon.com/CPR-CS90-Overflow-Box/dp/B0002JEGSG https://www.amazon.com/Blue-Ocean-Overflow-Continuous-Aquarium/dp/B073ZJWQJP I've stopped using lift tube-based overflows after many flooding incidents. At some point, air will fill the tube and the suction will stop. With the above design, because it's opaque, you might not even see this happening (until your floor is wet). I will never, ever, ever, ... x1000, use a lift tube-based overflow again. Your mileage may vary... 🙂 Edited December 8, 2023 by Galabar 1 Link to comment Share on other sites More sharing options...
MCJ Posted December 8, 2023 Share Posted December 8, 2023 check on YouTube for king of diy 10$ DIY aquarium overflow. (not $10 anymore though) It solves the main problem with these type of lift overflows loosing prime by using a small vacuum pump to keep air out. I can't attest to it 100% yet anyway, I am setting up a tank with it in the next couple weeks and will post the build and provide some feedback on this design. Link to comment Share on other sites More sharing options...
Galabar Posted December 8, 2023 Share Posted December 8, 2023 (edited) On 12/8/2023 at 1:59 PM, MCJ said: check on YouTube for king of diy 10$ DIY aquarium overflow. (not $10 anymore though) It solves the main problem with these type of lift overflows loosing prime by using a small vacuum pump to keep air out. I can't attest to it 100% yet anyway, I am setting up a tank with it in the next couple weeks and will post the build and provide some feedback on this design. This one has something similar (I worry about what happens during a power failure): https://www.amazon.com/CPR-CS90-Overflow-Box/dp/B0002JEGSG Edited December 8, 2023 by Galabar Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now