Phillip Posted April 6, 2022 Share Posted April 6, 2022 Ok, I need some ideas. I have a couple Ziss Bubble Bio Moving Bed Filters I’d like to put outside in my container “ponds”. I’m having trouble with the suctions cups staying attached due to the shape of the tubs. I’ve tried propping up a floor tile and sticking the filter to it, but it keeps coming unstuck. Does anyone have any good tricks??? Link to comment Share on other sites More sharing options...
nabokovfan87 Posted April 6, 2022 Share Posted April 6, 2022 (edited) I actually had this specific issue and never got it resolved. I would say you are gonna end up using some silicone or something. You can also drill a hole and potentially mod it such a way to install something with rubber washers and nylon hardware (or something fish safe) so you can tie it down that way. Even when I used the base of the tub, it just never stuck. I tried for months a variety of ways. Edited April 6, 2022 by nabokovfan87 Link to comment Share on other sites More sharing options...
Phillip Posted April 6, 2022 Author Share Posted April 6, 2022 On 4/6/2022 at 1:17 AM, nabokovfan87 said: I actually had this specific issue and never got it resolved. I would say you are gonna end up using some silicone or something. You can also drill a hole and potentially mod it such a way to install something with rubber washers and nylon hardware (or something fish safe) so you can tie it down that way. Even when I used the base of the tub, it just never stuck. I tried for months a variety of ways. I was thinking of drilling holes in the tile and zip tying through the holes instead of using the suction cups. I’m hoping for an easier option though lol. 1 Link to comment Share on other sites More sharing options...
nabokovfan87 Posted April 6, 2022 Share Posted April 6, 2022 If you can. Perhaps get a piece of slate or something and just set that against the wall. The ziss might be at a slight angle, but you give the fish a cave and finding something flat, narrow width, but tall enough would just be the issue. The irony is those suction cups have removed fingernails they are so insanely strong. I used a knife against the glass because I could never get them off. Link to comment Share on other sites More sharing options...
Phillip Posted April 6, 2022 Author Share Posted April 6, 2022 On 4/6/2022 at 1:24 AM, nabokovfan87 said: If you can. Perhaps get a piece of slate or something and just set that against the wall. The ziss might be at a slight angle, but you give the fish a cave and finding something flat, narrow width, but tall enough would just be the issue. The irony is those suction cups have removed fingernails they are so insanely strong. I used a knife against the glass because I could never get them off. Yeah I know! They work perfect in an aquarium. 1 Link to comment Share on other sites More sharing options...
Guppysnail Posted April 6, 2022 Share Posted April 6, 2022 Can you zip tie the entire unit to a pvc pipe the zip tie a hook on the pvc to hang inside the tub? I’m not real handy so not quite sure why this popped into my head or if it is doable. 🤪 1 Link to comment Share on other sites More sharing options...
Widgets Posted April 6, 2022 Share Posted April 6, 2022 On 4/6/2022 at 6:10 AM, Guppysnail said: Can you zip tie the entire unit to a pvc pipe the zip tie a hook on the pvc to hang inside the tub? I’m not real handy so not quite sure why this popped into my head or if it is doable. 🤪 Or a segment of the plastic craft mesh. Link to comment Share on other sites More sharing options...
Phillip Posted April 6, 2022 Author Share Posted April 6, 2022 On 4/6/2022 at 5:10 AM, Guppysnail said: Can you zip tie the entire unit to a pvc pipe the zip tie a hook on the pvc to hang inside the tub? I’m not real handy so not quite sure why this popped into my head or if it is doable. 🤪 Might be something to look in to… On 4/6/2022 at 5:39 AM, Widgets said: Or a segment of the plastic craft mesh. Ohh that might work Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now