Ken Posted August 31, 2021 Share Posted August 31, 2021 Has anyone tried something like this as an aquarium stand? The dimensions look good as well as the weight bearing capacity. I really don't like the appearance or quality of the stands at the Pet****** store these look like viable option, opinions? https://www.amazon.com/dp/B0839C4685/?coliid=I2W20NKQSO39PH&colid=1IHY2BABROHEZ&psc=1&ref_=lv_ov_lig_dp_it https://www.amazon.com/dp/B088P7LTMH/?coliid=I3M6Z8MX8RHUO5&colid=1IHY2BABROHEZ&psc=1&ref_=lv_ov_lig_dp_it 1 Link to comment Share on other sites More sharing options...
Odd Duck Posted August 31, 2021 Share Posted August 31, 2021 I went for the not as pretty industrial/garage shelves from Home Depot. The thin (only 3/8”) particle board shelves were replaced with poly sealed 3/4” outdoor-grade plywood when the original shelves bowed under the weight of the first 10 gallon tank I filled. 😯 😔 I’m much more confident in the shelves I have now. 2 Link to comment Share on other sites More sharing options...
RachelElizabeth Posted August 31, 2021 Share Posted August 31, 2021 Wow, I really like the look of those stands! I bought both of my bigger aquariums used and they came with stands. I think the metal frame should be strong enough to support the aquarium, especially since they have supports in the center. The only negative to these is that I wouldn't have a closed cabinet to hide all my fish foods, chemicals, and other stuff haha. 2 Link to comment Share on other sites More sharing options...
Patrick_G Posted August 31, 2021 Share Posted August 31, 2021 I’ve been contemplating that type of stand for some small tanks and wabi kusa. An aquascaping YouTube I watch has something similar. It’s very living room friendly. photo from MJ aquascaping 2 Link to comment Share on other sites More sharing options...
Atitagain Posted August 31, 2021 Share Posted August 31, 2021 Would be a good look. We have a living room with similar decor. So if you do get these make sure you post pics here so I can show my wife and possibly talk her into another tank or two. And have a tank outside my fish room. 1 Link to comment Share on other sites More sharing options...
Guppysnail Posted August 31, 2021 Share Posted August 31, 2021 I think it would be fine but I would worry about the mdf particle fiber board warping with water exposure. I coat all my wood stands (repurposed furniture🤣) with heavy polyurethane. So I would definitely use one but add that extra protection. Helmsman makes a dynamite polyurethane 3 coats and i have some wood stands over 20 years old still great shape. 2 Link to comment Share on other sites More sharing options...
Biotope Biologist Posted August 31, 2021 Share Posted August 31, 2021 I second Helmsman for all my woodworking needs. Looks fantastic too, the satin finish is great if you don't like the look of high gloss. For aquarium stands I like thrifting for solid oak furniture, but now that thrifting is "in" it's getting harder and harder to find dense wood furniture. I would imagine the metal stand from amazon would be great! I have seen youtubers lift the particle board out and replace it with sealed butcher block. Looks cleaner, is sturdier, and waterproof. 1 Link to comment Share on other sites More sharing options...
StevesFishTanks Posted August 31, 2021 Share Posted August 31, 2021 The weak points are the fake laminated wood and the leveling feet Link to comment Share on other sites More sharing options...
Tanked Posted September 4, 2021 Share Posted September 4, 2021 For your tv set yes, for your aquarium, I would not risk it. Several of the reviewers refer to the veneer as "contact paper" with other quality control issues... The frame is probably spot welded which is great until it isn't. The total capacity of the stand is 300# even though the picture shows the stand holding 520# Anything more than a single 30 gallon would probably be pushing it. Link to comment Share on other sites More sharing options...
Ken Posted September 4, 2021 Author Share Posted September 4, 2021 I ended up buying a Sofa Table at the thrift store that is old enough to be solid wood with mortise and tenon or glued and screwed joints. It held my wife and I sitting on it and wiggling around (300#). The size is perfect for a couple ten gallons end to end and I like the height. The stain refresh is drying now. I'll give it a couple coats of varnish starting tomorrow. 2 Link to comment Share on other sites More sharing options...
Ken Posted September 20, 2021 Author Share Posted September 20, 2021 (edited) Well here it is. $20 initial price put another $30 into it for stain, varnish and the protective cover. I took apart all of the joints that needed attention and reglued and recrewed. It's anchored to the wall with a piece of 1x3 fastened to the frame of the table and into a stud on the wall. The stuff on the top I bought from Joann craft store. Edited September 20, 2021 by Ken . 7 Link to comment Share on other sites More sharing options...
Patrick_G Posted September 20, 2021 Share Posted September 20, 2021 Wow, that’s a nice score! 1 Link to comment Share on other sites More sharing options...
ARMYVET Posted September 20, 2021 Share Posted September 20, 2021 On 9/19/2021 at 10:46 PM, Ken said: Well here it is. $20 initial price put another $30 into it for stain, varnish and the protective cover. I took apart all of the joints that needed attention and reglued and recrewed. It's anchored to the wall with a piece of 1x3 fastened to the frame of the table and into a stud on the wall. The stuff on the top I bought from Joann craft store. Now that is a nice piece of furniture. It totally sucks that furniture isnt built like that anymore! Excellent refinish job done in it @Ken. Looks professionally done! 1 Link to comment Share on other sites More sharing options...
mountaintoppufferkeeper Posted September 20, 2021 Share Posted September 20, 2021 That stand you ended up with looks excellent. On the original post... I've considered building out of the threaded gas line steel pipe and fittings,which are rated for a minimum of 15 tons of psi internal pressure before failure, or conduit pipe painted black and dimensional lumber. The only wood being the top. Post the world shutting down I believe pipe is a bit cheaper not as much demand as wood. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now