ThomasLC Posted August 15, 2021 Share Posted August 15, 2021 OK I got the base cabinet setup and got the tank resealed and put back on top of the stand. Where it sits there is a slight lean to the left resulting in water level differences. I want this to be a bit more level but as this stand is made from 3/4 birch plywood it doesn't have the normal 4 corners of to simply put something underneath. What method would you guys recommend to get the low side up the 1/8th it needs please. Its doing a leak test now to make sure it all sealed. I am going to drain it tomorrow and try and get something underneath it. 2 Link to comment Share on other sites More sharing options...
Fish Folk Posted August 17, 2021 Share Posted August 17, 2021 You might be able to custom cut cardboard pieces to fit underneath the entire side / edge. If you cut two that are wide and long, then a shorter one to put between that isn’t as long to sandwich, the result could be a sort of “shim.” Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now