DebD Posted May 26, 2021 Share Posted May 26, 2021 Hi all 😁 I'm curious about possibly using 1 or 2 air pumps for several tanks since I'm rearranging my tanks and adding another 40g. I have a corner with a 29, 15, the new 40 and a couple 10s. I run aquaclear hobs with 1 or 2 sponge filters and/or airstones and hang-on back breeders. Looking for ideas/recommendations instead of having 1 per 1 or 2 tanks as I do now. Link to comment Share on other sites More sharing options...
Fish Folk Posted May 26, 2021 Share Posted May 26, 2021 I’d suggest you get a couple metal gang valves from Co-Op and Co-Op airline. Get a strong pump with two outputs. There’s a few models of taller pumps that seem to work well for us of late. Link to comment Share on other sites More sharing options...
lefty o Posted May 26, 2021 Share Posted May 26, 2021 pick up a pump rated for 100+ gallons and use one of the metal gang valves/manifolds. i believe the co-op sells the valve setup, or they can be obtained from a local source too. 1 Link to comment Share on other sites More sharing options...
JakeH Posted May 26, 2021 Share Posted May 26, 2021 I have a Hygger duel outlet pump rated for 20-600 gallons that I’ve been using for a similar setup. It’s been pretty quiet and no problems to speak of so far. It’s nice having the dial to adjust the outputs. I try to future proof as I build and this pump should work for future expansion until I need to make the jump to a linear piston pump. 1 Link to comment Share on other sites More sharing options...
DebD Posted May 26, 2021 Author Share Posted May 26, 2021 33 minutes ago, JakeH said: I have a Hygger duel outlet pump rated for 20-600 gallons that I’ve been using for a similar setup. It’s been pretty quiet and no problems to speak of so far. It’s nice having the dial to adjust the outputs. I try to future proof as I build and this pump should work for future expansion until I need to make the jump to a linear piston pump. Thanks. I was looking for brands more-or-less and size. I use gang values now to run sponges with the previous mentioned stuff. I'd approximately be running about 10 things on it Link to comment Share on other sites More sharing options...
DebD Posted May 26, 2021 Author Share Posted May 26, 2021 (edited) 11 hours ago, BIG GREEN said: Amazon.com : AQUANEAT Aquarium Control Valve, Fish Tank Air Valve, Metal Stainless Steel Gang Valve, Air Flow Distributor Splitter for Air Pump (Middle 4 Way) : Pet Supplies I use this to run 4 tanks with one pump. ( 3 10 gallon and 1 40 gallon) Yeah I have gang valves but what are better air pumps ? I would be using gang valves for the 2 larger tanks plus 3 to 4 smaller. Figure 10 to 12 lines total Edited May 26, 2021 by DebD Link to comment Share on other sites More sharing options...
DebD Posted May 26, 2021 Author Share Posted May 26, 2021 11 hours ago, Fish Folk said: I’d suggest you get a couple metal gang valves from Co-Op and Co-Op airline. Get a strong pump with two outputs. There’s a few models of taller pumps that seem to work well for us of late. Yeah I use gang valves. I need pump recommendations Link to comment Share on other sites More sharing options...
ARMYVET Posted May 26, 2021 Share Posted May 26, 2021 You could check into the linear piston air pump that Aquarium Co-Op sells. It is a bit pricy but oh so worth it. I recently got to see one in action ....it is very quiet and puts out a ton of air. The one pump was running all of his tanks and he had plenty of air to spare for when he keeps on adding. Hope this helps some. Good luck 1 Link to comment Share on other sites More sharing options...
Fish Folk Posted May 26, 2021 Share Posted May 26, 2021 Here you go. Eheim generally makes good products. I’d go for this. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now