RyanU Posted May 23, 2021 Share Posted May 23, 2021 After all the advice I have received from everybody in this site about my water clarity issue i think I have determined that my filter Just can't handle my tank. I bought a complete top fun kit that had everything i needed. Is it possibly that my filter can't keep up. I modified it to make it the best I could. I put a coarse sponge, fine filter material, bio rings, and then more fine material on top to polish that I remove every couple days. Nothing seems to be working. I also tucked a piece of fine filter around the intake tube in the back. I'm wondering should I replace the filter with an aquaclear, and go one size up to a 50. Or should I do something different with my current filter. TIA Link to comment Share on other sites More sharing options...
Fish Folk Posted May 23, 2021 Share Posted May 23, 2021 28 minutes ago, RyanU said: After all the advice I have received from everybody in this site about my water clarity issue Not having followed your previous threads carefully, it is difficult to jump in intelligently without context. But I'll share from my experience the filtration system that seems to work well for us is a combination of sponge filters with some sort of mechanical filter (hang-on-back is most common, though canister filter is also great). Sponges are excellent biological filtration systems and add valuable aeration. I recommend a medium or coarse sponge. Fine sponges clog easily and gather unwanted debris / growth on the outside. Many of our small tanks - 10 gal or 20 gal - have a small HOB on one side in the back, and either a sponge or box filter on the other side / back. One thing to bear in mind: having added filtration does not necessarily mean that you have added BIO. IT depends entirely upon how much ammonia is being produced to feed them. A heavily stocked tank will produce more waste / ammonia, and will necessarily be able to feed more / larger bacteria colonies. A lightly stocked tank may not really be able to feed a large colony. So, what that means is that having _more filtration_ only means you have more possible biological _filtration space_ not necessarily more bacteria. Again, not sure what your water clarity issues have been. Sometimes it's bio-related, sometimes its is another chemical issue. Link to comment Share on other sites More sharing options...
RyanU Posted May 23, 2021 Author Share Posted May 23, 2021 To summarize quickly for you. I started with tannins. Used purigen to remove. Then a white haze that was described to me as a bacterial bloom. I did 30% water changes every other day last week to try and clear that up. Thinking maybe I had bunch of phosphates in my tank water column allowing the bacteria to bloom instead of finding a home somewhere else. Someone also mentioned bio film on the glass so I scrubbed the glass with a brush. It seems to get better immediately after the water change but then a coke days later it looks like this. (See picture below). I ran the full gambit of test this morning Ammonia and nitrite 0 Nitrate hard to read but definitely in the orange Ph 7.2 The sponge material that I put in for mechanical was an aquaclear 70 sponge cut to fit. And then some fine filter recommend by lfs again cut to fit. I also have aqua clear 30 bio media in there. On a side note. When I have been changing the water I rinsed the media on the first day. I haven't vacuumed the gravel as I have baby mystery snails scattered around the bottom and in the gravel so I don't want to suck them up. Link to comment Share on other sites More sharing options...
Mmiller2001 Posted May 23, 2021 Share Posted May 23, 2021 An Aquaclear can not restart itself after a power outage. Unless they have redesigned their filter, I'd look elsewhere. Link to comment Share on other sites More sharing options...
ChemBob Posted May 23, 2021 Share Posted May 23, 2021 A filter likely won't remove a bacterial bloom. It will run its course. It is relatively common amd will clear on its own. I would go back to your normal water change routine. Give it a week or two and I'd expect the water to clear. Your filter is probably fine, especially with your media upgrades. Link to comment Share on other sites More sharing options...
ChemBob Posted May 23, 2021 Share Posted May 23, 2021 Oh, I also agree with @Fish Folk, i have sponge filters in all my aquariums (albeit much less than him). I think the aeration helps, and like that it provides surface area and helps keep the air stone in place. Even if you just do an air stone, that would help with the aeration part, which I think is the most important part if you have another filter. 1 Link to comment Share on other sites More sharing options...
lefty o Posted May 23, 2021 Share Posted May 23, 2021 filtration can help somewhat, but the best cure for cloudy water is time. no one likes looking in a cloudy tank, but generally the best course of action is to just wait it out. 2 Link to comment Share on other sites More sharing options...
Ryan F Posted May 23, 2021 Share Posted May 23, 2021 So long as your water isn't cloudy going into the tank then I'd say this looks like a classic bacterial bloom. Monitor nitrogen levels and ammonia and allow the bloom to burn itself out. The more you change the water the more time it will take for the bloom to clear. 2 Link to comment Share on other sites More sharing options...
RyanU Posted May 23, 2021 Author Share Posted May 23, 2021 How do I monitor nitrogen levels? Every time I test the water everything looks good. 0 ammonia,0 nitrite,20-40 Nitrate. Should I just hold off on water changes until my Nitrate are up. If so Wendy wolf be a safe level before I need to change water. Link to comment Share on other sites More sharing options...
Lowells Fish Lab Posted May 23, 2021 Share Posted May 23, 2021 @RyanU Sometimes changing water during a bacterial bloom can just make it worse a day later. Something about bringing in new nutrients that they feed on. I've only had a tank look like that once and it was because I'm a dumb dumb and forgot to plug a canister filter back in after working on the tank. A day later it clouded up heavily. I don't think a moderate initial water change is a bad idea, in my case I did just one after I realized my mistake then I left it alone. The tank cleared on its own in a couple of days. Link to comment Share on other sites More sharing options...
RyanU Posted May 24, 2021 Author Share Posted May 24, 2021 OK. So maybe the advice a got about doing multiple small water changes through the week was a bad idea. I will let it go for the week and see what happens. Thanks for all the help 1 Link to comment Share on other sites More sharing options...
Ryan F Posted May 24, 2021 Share Posted May 24, 2021 As for monitoring nitrogen levels. You can use a test strip or the master kit. I didn't want you to stop water changes and then have a nitrite/ate spike that would be dangerous to pets. I was trying to cover all my bases. To be absolutely clear. You should be fine leaving the tank till the water clears. Link to comment Share on other sites More sharing options...
RyanU Posted May 24, 2021 Author Share Posted May 24, 2021 Yea I do check once or twice a week just to check but everything is always good. That's why I was confused by the bacteria bloom. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now