Search the Community
Showing results for tags 'modifications'.
-
In case you missed it, here is the original thread: I want to start off by specifying a few ground rules here and clarify, succinctly, about some of previous results here. How to improve the Seachem Tidal Filters: Phase 1 (No tools or permanent mods) -Replace foams in the filter basket -Verify basket is not overstuffed -Remove air from media bag and tuck as much as possible -Set flow down one "tick" Phase 2 (Easy mods, no power tools needed) -Requires All Phase 1 Mods -Cut bottom grates of basket to improve input flow -Seal basket "window" cutout and all small bypass holes in the filter basket Phase 3 (Full mods, major change to how filter functions) -Requires All Phase 2 and Phase 1 Mods -Seal skimmer grate with silicone -Seal pump housing grates with silicone -Cut slots in bottom of Intake tube -Add prefilter sponge "What's the goal for this project now?" you might ask..... The goal is that I need to verify things we tested previously on a larger filter. This gives us a larger sample size, more information, and a different pump/impeller design to work with. This also has some slight variations compared to the original mods. I also plan to get the information for each phase of upgrades to be more clear and easier to reference for those interested. This is one of the filters I originally did some testing with. You'll see some remnants of that testing here. Holes in the base of the basket Added Coarse - Medium - Fine Foams Skimmer eating plants Basket tab broke one me 😞 Here are some of the things we're going to use for the mods on this filter: First, to clean everything, I use 91-99% Isopropyl Alcohol. Before adding silicone on anything, it is usually recommended to remove oils and prep the surface this way. For the more permanent mods: I will go ahead and add more details here shortly with the mods completed. Needless to say, we're basically ready to go any second now!
- 36 replies
-
- filter
- hang on back
-
(and 5 more)
 Tagged with:
-
One of my big questions has often been how to get a fitting or output design on my pump heads. I don't want to use a circulation pump because it's a bit bulky for smaller tanks. There's also a risk of the grille and what not with certain species. Anyways, I wanted to share this and ask for opinions. Do you this something like this is acceptable for use and will work for certain applications. Ironically, or thankfully, there is a lot of crossover between the hardline and soft tubing applications on computers that make a bit more sense for the aquarium modding applications. I'm sure Dean could make some cool stuff if he spent a day with Jay, for example. Let me know your thoughts, I'll try to track down some applicable parts and cost of those parts to see if something makes sense.
- 1 reply
-
- 1
-
- rigid tubing
- filter
-
(and 3 more)
 Tagged with:
-
I could literally write some sort of an essay on how much I have had to mess with my HoBs to get them to function and "fix design issues". I have always enjoyed this aspect of the hobby and I'd love to ask everyone about their setups. For reference below, I'll toss in a few pretty epic videos when it comes to filter setups. Please feel free to post and share your filter setups here! I'll have to grab some paper and sketch out a few mods I've done!
- 27 replies
-
- 1
-
I am debating on getting a Python for my new tank as the tank is on the opposite side of the house as my sink. My kitchen sink is old and for the moment lets just assume I can't get a python fitting to work. I have seen Cory's video where he attaches a powerhead to the end of the tube so that he does not have to mess with the suction valve at the faucet. With this approach wouldn't you have to switch the ends of the pipe when you wanted to drain/fill (or at minimum move the powerhead). This would not really be that hard, but would possibly make me drip through the house. I am trying to think of ways that I could avoid this any maybe even save some water when using the python. It seems like I would be able to use the 3 way valve that comes with the python and connect a powerhead to the "faucet" side. Throw it in a bucket full of water and just let the bucket circulate/overflow to drain the tank. Then pour the dirty water out of the bucket, fill it up again with fresh water, and then fill the tank back up again. Does anyone know of a reason why this would not work? I don't see anyone use a power head in this manner they all seem to direct attach it to the tube which would ultimately be faster.
-
I'm not handy at all but I thought I'd try drilling my AC rock planter. I have drill bits for drilling holes in wood - could I use one of those to make a hole? Is there a chance the planter will shatter? Has anyone else done this? Do little fish get caught between the 2 sides? I thought I'd put some acrylic goo to seal off the narrow areas. Good idea?