Bethany92

I was ditching tubing because they’ve got stuff in them but I’ll keep now, I thought it was meant to be cleaned every month so it wouldn’t get obstructed and I haven’t gotten a brush long enough to clean them out. Is the cleaning every month meant to just be the inside of the chiller? This is my first time having a chiller and it was from Amazon so instruction manual wasn’t as helpful for someone that barely knows anything about chillers haha I was just using ice packs with the axolotl, it needs temps to stay around 65F. The other fish would definitely be fine without. would they be fine without air holes? I assume so since I’ve had fish mailed to me in bags before

Hey there! I’m about to move in July about 3 hours away from where we currently are. I have 4 tanks to move and I never moved tanks from one house to another. This is a long post, I’m sorry. I just want to be sure I do this correctly and not lose my fishy friends. I already know to keep the filter media submerged in some of the old tank water using a bucket with a good sealing lid, and I’m assuming to keep each tank’s filter media separate in the corresponding tanks’ water. However, to move the tank, substrate, and all the livestock, I’m not sure what I’m doing. I wasn’t going to do this until we were ready to move the tanks and I would be a same day tear down and set back up, if possible. Basic questions: Do I keep the substrate? Can I put all the live plants from all tanks into the same bucket of dechlorinated water? Tank 1 is a 40gal with an axolotl and sand substrate. I’m planning on putting the axolotl into a plastic tub (6qt) with an air stone and ice packs in a cooler. I also have the tank chiller to move, which I was just going to empty the water out, run a few cycles of vinegar through it, let it dry out, ditch the existing hoses, and then hook it up with new hoses. Tank 2 is a 40gal with 6 pea puffers and 6 cory cats with sand substrate and live plants. How much water do I need to transport the pea puffers and Cory cats? And I was planning on separating them into species only containers for the move. Would 6qt containers work for this? Battery powered air stone, or will they be okay for a three hour drive? Tank 3 is a 20gal with 6 neon tetras, 4 Gertrude blue eyed rainbow fish, 6 cherry shrimp, and 2 mystery snails, live plants and a lava rock type substrate. I was honestly planning on getting a new 40gal tank for them and moving my betta into this 20gal after we move. I was going to just do mystery snails in one small container, cherry shrimp in another small container, then the fish all together in a 6qt container. Tank 4 is a 5gal with my betta and live plants. I was just going to get a small cup to transport him in, kinda like the fish stores use to keep them in. Then I was going to tightly pack the containers in a box to limit jostling in the car, but if they need an air stone running in every container, I’m not sure what I’m supposed to do

This is my pea puffer and Cory tank. There’s a window to the side that blinds and curtains are kept closed, but the window across the room, about 8ft away is usually open. I’ve been battling this brown algae for a while, and am going to be moving my tank to the other side of my living room where there’s no windows. Other than moving it after cleaning off the decorations and sifting the sand around, what else can I do to get rid of it and keep it gone? I even went almost three weeks without the plant light on, and that didn’t even work.

Would I be able to put 6 cory cats into a 20 gal with a betta? So far that’ll be the only tank they could go in for a back up. I suppose the betta can either get upgraded to a 29 gal or I just take the betta out and put him by himself in a 5.5 gal 😂 he picks on one of my mystery snails, I have two and the betta only goes after my magenta snail. 🤦🏻‍♀️ That tank is heavily planted now, and it has seemed to decrease the betta’s obnoxious behavior, but he likes to snoop at the bottom of the tank when he can’t find the magenta snail on the glass, so I don’t want him to pester the Cory’s. Also, the snail is fine, the betta just puffs up and nips at the shell until the snail falls off the glass. The antennas haven’t been nipped and always the same size when I check on him.

I have a 29 gallon tank that I’m wanting to have pea puffers in along with peppered Cory catfish. There’s mixed information about doing this. Does anyone had any personal experience with these two breeds being housed together? Also, would I be able to do 6 pea puffers and 3 (or more) peppered Cory’s in a heavily planted 29 gallon tank?

Oh! Thank you all!! It’s definitely a bladder snail. I found a website that said betta are likely to eat them to keep their population under control. I’ll keep an eye on it and go from there. They seem to be beneficial as long as they don’t overtake the tank.

I bought plants from aquarium co-op and didn’t bother quarantining them. I don’t mind having snails. I have a betta and a mystery snail currently. what kind of snail would it most likely be and will my betta try to eat it while it’s still tiny? I just want to know what kind it is in case it’s an asexual reproducer. 🫣 I like snails but not 30+

How fragile is a cycled tank? I had a really great ecosystem starting in my 5.5gal tank. I have a betta (Milo) and a blue mystery snail (Blukey) along with lots of little substrate worms that Milo loves to snack on, from what I've read it's the harmless worms that eat fish waste and help out the biological filter. I added three live plants today but made a huge mistake. The big mistake I made with it was having to adjust and move the existing plants around and add more substrate to plant the new ones. It got incredibly cloudy as I put in the rest of the Fluval substrate I had on hand. I didn't rinse it long enough and apparently forgot the nightmare it created when I first set up this tank a couple months ago because I repeated said nightmare again today. I capped the substrate with smooth river stones and then I did two cycles of vacuuming off the river stones and adding fresh water to the tank, it was about 50% change the first time and then 75% the last time. Milo and Blukey were in a 2.5gal tank with old tank water and a sponge filter while I did all of this, took me about 4 hours as I tried to wait as long as possible to let as much sediment to settle as possible. I didn't want to keep them in the small tank overnight since I don't trust the small heater I have for it to not cook them, so which is why I did the water changes. I add Seachem Prime and Seachem StressGuard to tap water every water change. After the two cycles of sucking up the settled sediment and adding clean water, it was obviously a full water change. However, I did not rinse off anything that was in the tank prior to this - so all the river rock and decorations along with the substrate that had been in there since the first set up and tank cycle were placed back into the tank. I did have to rinse the sponge filter off as it had a ton of sediment on it. Will I have to cycle my tank again?

I have two questions - I cleaned the tank about 2 weeks ago and this is what it looked like today. I checked water parameters 2 weeks ago and again today… and the tank has been cycled for about a month now and everything is good, just high pH which I read could be related to the algae overgrowth. I cleaned the tank today, removed about 30% water trying to get as much algae as possible, and then noticed a detritus worm. So I assume that also means the tank ecosystem is thriving now. 😂 I looked at the articles on Aquarium Co-Op about algae and I had turned the light down from 8 hours to 6 hours about a month ago, the plants are all medium to low light plants. I am going to leave it off for a few days until I can add algae eaters. I have plans to get 2 zebra nerilite snails for a tank companion for my black orchid betta, but now I’m wondering if I would need more than 2 snails. Or 2 snails and one of those bottom dwellers. How do you decide how many algae eaters to get for your tank? It’s a 5.5gal tank, I don’t add fertilizer. When I started the tank about 2 months ago - I used fluval substrate under River stones in the areas I put plants, root tabs and some liquid fertilizer. But I haven’t added anything since then. How long would it take for all that fertilization to be used up and no longer a contributor to algae overgrowth?

Milo is much better today! I did a small water change, maybe 15%, yesterday and only put in Prime (used tap water for the change) and Stress Guard. Left the Indian almond leaf in the tank. The water parameters have all been consistent, aside from the ammonia which was about 0.5ppm yesterday. Today, ammonia was below 0.25ppm and the nitrites are at 0ppm. Added a second dose of Stress Guard per instructions, and this is Milo about 3 hours later. His color is definitely coming back and his fins are starting to relax! 🥰 Now, it’s just a matter of convincing him he can’t eat just freeze dried brine shrimp and daphnia. Thank you all for helping me figure out how to help Milo and get my tank cycled properly!

I’m just now learning the siphon method for putting fresh water into a tank. Before I used to put the fish in a separate tank while I did the water change with a rather strong gravel vacuum thing, then wait 2 hours for the temp to regulate in the tank before putting the fish back in. And that was a lot of going back and forth between the kitchen and the fish tank to refill it and messing up my tank decor. Now that I’ve discovered the siphon method and how much gentler it is on the tank and the fish, I’ll just prepare the freshwater, put a heater in it and once the temperatures are equal, I siphon the water into the tank. I got a Python (the lower cost one, not the fancy spill free one) and that’s much gentler than the other gravel cleaner I had so I’m more comfortable with the fish staying in the tank for both cleaning and filling. I’ve seen a method of putting a tube into a knot to slowly drip water into a new fish’s cup/bag to slowly acclimate them to the tank. Like incredibly slow drip. I assume I could do something similar with putting the fresh water into the tank instead of waiting for it to heat up, so the temperature on the tank doesn’t drop. But I will wait until I can experiment with it so I don’t temperature shock my fish.

That makes sense. With needing small water changes to keep ammonia levels low, what level of ammonia would you do a water change and what percentage of water would you change in a 5gal tank for that level of ammonia? Is it correct to assume you don’t want to do daily water changes? Or would 10% daily changes be more beneficial than waiting x amount of days in between larger water changes (like a 25% water change)?

I didn’t even think to look at Seachem’s website, but that’s reassuring! I assumed it wouldn’t stop it but I wanted to double and triple check before just going with my assumption. I’ll make notes on the information you provided earlier in the thread about Prime and it should be mostly smooth sailing until it’s fully cycled now.

I know the leaves affect the pH, so I’m also testing that daily. Since it’s actually at 7.4, I decided it shouldn’t tank the pH and may help the fish more with the stress and hopefully help him fend off any disease. From what I’ve seen about Prime is it just “locks up” the ammonia for 24-48 hours so it’s not harming the fish during tank cycling, and it’s used during the fish in cycling. There’s two different ways for fish in cycling - water changes or Prime to keep the ammonia and nitrite levels from harming the fish, but I don’t think Prime stops the cycling process from what I’ve been finding. https://fishlab.com/fish-in-cycle/#seachem-prime-fish-in-cycle I will try to be more patient. I’m getting panicky about losing Milo or having him get sick because of this prolonged stress and uncycled tank. I’ll keep focused on water parameters and taking it day by day and not make anymore changes.

His name is Milo, my three year old wanted to name him “blue clue” so his full name is Milo Blue Clue as a compromise 😅 The ammonia was increased to 0.25 this morning, so I dosed the tank with 0.5mL of Prime (I went with the 5mL per 50 gallons dose which was 1mL per 10 gallons, equating to about 0.5mL for 5gal). He’s also back to pale with clamped fins, though still swimming around and eating. I had added an Indian almond leaf last night, so hopefully as that starts disintegrating, it helps him with the stress and prevents any disease from starting. Question about Prime and the nitrogen cycle - if I have increased ammonia in the tank and that affects the fish, but nitrates and nitrites test at 0ppm, would dosing Prime to help the fish interrupt the nitrogen cycle or would the ammonia still be available for the bacteria but not harm the fish? From what I understand now of the ammonia cycle - an ammonia increase is the beginning of the cycle, then it progresses as one type of bacteria starts changing ammonia into nitrites that feed the second type of bacteria which turns nitrites into nitrates until both types of bacteria are at high enough levels to essentially detoxify the tank of ammonia and nitrites. And the tank is considered cycled when there are low levels of nitrates and 0ppm ammonia and 0ppm nitrites while feeding the fish normally for a week or two - which indicates there’s enough beneficial bacteria to sustain the current bio load of the fish.