desolesiii

This is a follow up to my post about my CPDs yesterday but I needed to attach a graphic photo with a warning. Was this caused by mycobacteria?

I just went through this disease. As of today, 13/16 CPDs are dead. The last three are moribund, and I've been treating with Maracyn. Did you get yours as fry from Aqua Huna by chance?

Oh also, two days ago, I thought I noticed ich on the CPDs, so for each of the last two days, I have added 5 mg of Ich X and have done a 33% water change.

Hey, everyone. PH: 7.4 Gh: 10 Kh: 4 Ammonia: 0 Nitrite: 0 Nitrate: 20-40 (33% WC whenever it hits 40 ppm) The aquarium is unheated, but ranges from 70° - 74°. I have an intermediately-planted 10 gallon tank, and it had 16 Celestial Pearl Danio (which were juvenile when I got them from Aqua Huna about 6 weeks ago); 5 Habrosus Corydoras; and Blue Dream Shrimp. I got all the fish around the same time, and just quarantined them in the same tank with Maracyn, Paracleanse, and Ich X. At the end of the week of them soaking in the meds, I started feeding them frozen daphnia. I carefully monitored the water parameters, and although the nitrates once briefly exceeded 40 ppm, I never saw ammonia or nitrite. After the second day of quarantine, the smallest CPD (still fry with its yellow stomach visible through its body) was found floating upside down with white fuzz occluding its mouth. This was the only CPD that died initially. Because the CPD's were so tiny, it was really hard to get them to eat at first but eventually the frozen daphnia were the first thing they started eating well. However, a lot of frozen daphnia got sucked into the sponge filter. When I cleaned the filter, I noticed that a lot of old frozen food was coming back into the water. After about a week, I noticed my largest CPD hanging out by the top of the tank gasping for breath. I'm inclined to say that it was pineconed from dropsy but the fish was so tiny, and I'm inexperienced, so my report has little probative value. However, this was the start of an onslaught in which the CPDs started dying one by one. I woke up one day to find the shrimp and the corys eating another Dead CPD. About three days after I saw this (which was today), I found that one of the corys has a bulging eye. Another couple of corys have gils that are very red. (These are likely not ammonia burns since ammonia is 0). I noticed the corys today and immediately added a pack of Maracyn. When I did this, a few of the CPDs swam up the surface and started gasping for breath. Two died after I both added Maracyn and increased the air flow to the sponge filter. I took every fish out earlier tonight and soaked them in a gallon of water with a tbsp of kosher salt mixed in (soaked for 10 minutes before they started settling to the bottom). I have about 6 CPS and 5 Corys left at this point. I put them all back into the tank. No deaths yet, but the night is still young. My plan is to add another pack of Maracyn tomorrow. At this point, I'm pretty sure that I'm going to lose everything except for the shrimp which seem unaffected. So, here are the questions I have. (1) Before I noticed mass die-off, I moved some rotala from this 10 gallon tank to my main tank. 😕 I soaked the rotala in a 5% bleach solution for about a minute, and then again in tap water before I made the switch. At the time, I had snails in mind, but to what extent should I be worrying about the main tank at this point? (2) If I ever want to have fish in my 10 gallon again, what should I do? 😕 I'm pretty new to this hobby, so I appreciate any insight you have. Thanks. Donny

She is also struggling to stick to to the wall because of her damaged fins.

Hey everyone. I have 6 zebra danios, 6 corydoras, 8 dwarf chain loaches and 3 hillstream loaches in a 40 gallon. I recently added a third hillstream loach (a female) to the tank. I looked into the tank and saw blood on her fins! Something had been taking a bite out of her. Then, I kid you not, I saw a zebra danio bite her. She sticks on the glass and is very docile compared to the other two hillstream males (which are also a little bigger). I immediately took the zebra danios out (they're food hogs and have been a real problem for me). My question is this: should I put her in my 10 gallon with the celestial pearl danios to recover or just leave her in the main tank? I'm worried because I keep seeing the dwarf chain loaches going up to her. I don't think they're biting her, but I'm freaking out. I had no idea zebra danios would do this. They seem to leave the other hillstream loaches alone, but I really want to have a female in the tank. The males will fight sometimes, and they seem better with the female around? It's my favorite fish and I want to do whatever I can to protect them. Anyway... thanks in advance for your advice. Also, is she a goner!? 😢

Everything I've bought from them has been good too, Ben! I just hadn't considered buying plants from them yet, but I think I will buy from them if I ever buy any plants online in the future. Good to hear that their plants are solid (as I expected they would be). 🙂

That is terrible to hear, and definitely shocking! However, with this information, I feel like I might be able to work up the courage to try Anubias again someday. One of the worst things about being a beginner in this hobby so far is that I haven't been able to develop common sense yet. Thanks so much for taking the time to help me along!

If I ever buy Anubias nana again, I will be sure to implement all of this advice then. I have not heard of a failure to float the plant as causing the plant to completely rot within three days though, and I wonder if Anubias rot can spread this quickly too. 😕 In any case... the bucephalandra are doing well, so I might stick to those from here on.

Unfortunately, the rhizomes turned to mush in just three days. 😞 I kept wondering why my tank water was smelling weird, and when I pushed one of the rhizomes with my forceps, it split in half becaus it was mushy. I don't think overuse of superglue was the problem. I did use more than a drop, but even the plants on which I used no superglue turned to mush. I am pretty sure these plants got too cold in shipping. The supplier sent me the following email, which struck me as being kind of weird. Hello dear, Here is some common reason that can make Anubias species rotten. 1. Attached to driftwood/rock by using string/thread or glue the wrong way. Read more* 2. Overshadow by a larger object or put the plant into a very tight spot in the aquarium. Resolve by put Anubias in bigger space where Anubias’s rhizome can grow freely. 3. Algae - Green / Slime algae can make Anubias rotted because of poor water quality. Resolve by doing water change regularly. 4. One rotten Anubias can make another Anubias species rotted as well. Make sure to remove all rotten Anubias from your aquarium and do some water changes. This only affects Anubias species, not affect other aquatic plants species. Also, don’t put Anubias near your water heater. 5. *The first reason is the most common reason. When using string/thread or glue to attached Anubias species to driftwood/rock. Make sure to do it carefully and always do research on Google / Youtube if you don’t know how to do it yet. Using glue is the most common way to kill the Anubias. When using glue, make sure to use a very tiny amount (less than a drop would be good) and only apply the glue to only the root part, trim the root shorter before apply glue for best result. Never apply glue to the rhizome because it will make them rotted. TIPS: When you first introduce the Anubias to the new aquarium. Always let them float or sink in your aquarium for at least 48 hours to one week to let them adapt to your new aquarium environment before attaching them to your favorite objects (driftwood, rock, stone, decoration, etc). Thanks for your question and please don’t hesitate to contact us again if you have any question or concern.

That is highly likely, considering the fact that they were in the mail for 8 days, and it has been below freezing at night in Ohio. 😕 Maybe that's what happened...

Again, it was just shocking to notice this kind of deformation within less than 2 days. I had always heard that deficiencies would appear gradually, and I wasn't expecting this.

And this is what had happened to the leaves by Sunday morning. 😕

Here is a picture from Friday night when I was setting it up.

Thanks for using your time to help me out! It really means a lot! I partially followed your advice and ordered some Baxter AE. Hopefully that will keep the shrimps happy and flourishing. I did see that one of the females was berried last night, which makes me feel a little bit better. Hopefully some of the new shrimp will survive and replace the one that died. Again, thanks for the comment.