Hello All, I am putting together a new stand to hold three tanks vertically in my fishroom, two 20g longs and a 29 gallon on the bottom. So the tanks are all 30" across and 12" deep. I have seen Cory's video with the stands in the store only supporting the ends of each tank, front-to-back. I am considering doing this but seems a bit frightening. I have also read a few articles saying all the weight is on the four corners so in theory I should be fine, but ... Every tank stand I have previously built supports the entire bottom frame, sides and front/back. Just wondering if others have built similar stands for tanks these sizes and just supported the sides, leaving the front and back edges open?